Product Key Substrates Metal

  • vibra-tite 111 threadlocker

    Vibra-Tite 111 Low Strength Threadlocker

    A low strength anaerobic threadlocker designed for locking threaded fasteners smaller than 1/4” in diameter, which require disassembly with standard hand tools. Also works on set screws, and screws that have a long engagement length.

  • 12150 Threadlocker Applied

    Vibra-Tite 121 Medium Strength Threadlocker

    A medium strength anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance.

  • Vibra-Tite 122 Oil Tolerant Threadlocker

    A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 1/4'' to 3/4'' in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.

  • Vibra-Tite 123 Medium Strength High Temp Threadlocker

    Typical uses include locking nuts or bolts ranging from 1/4” to 3/4” (6-20 mm) in diameter at continuous temperatures up to 450°F.

  • Hot

    Vibra-Tite 125 Medium Strength Gel Threadlocker

    A medium strength anaerobic gel threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance. No-drip gel formula.

  • 13150 Threadlocker Applied

    Vibra-Tite 131 High Strength Threadlocker

    A high strength anaerobic threadlocker designed to permanently lock fasteners up to 1'' in diameter. Exhibits good temperature and solvent resistance.

  • Vibra-Tite 132 High Strength Primerless Threadlocker

    A high strength and high temperature threadlocker designed for permanently locking or sealing nuts and bolts up 1” diameter. Primerless, oil tolerant formula will cure even on passive materials such as stainless steel.

  • Vibra-Tite 135 High Strength Gel Threadlocker

    A high strength anaerobic gel threadlocker designed to permanently lock fasteners up to 1” in diameter. Exhibits good temperature and solvent resistance. No-drip gel formulation makes it easy to apply.

  • Vibra-Tite 137 High Temp/High Strength Threadlocker

    A high strength and high temperature anaerobic threadlocker designed to permanently lock fasteners up to 1 1/2'' in diameter. Joins threaded parts exposed to operating temperatures up to 450°F

  • Vibra-Tite 140 High Strength Threadlocker

    A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks and seals fasteners from up to 1'' in diameter.

  • vibra-tite 141 threadlocker

    Vibra-Tite 141 High Strength Threadlocker

    A green general purpose threadlocker for permanent locking of threaded assemblies. 141 works on fasteners up to 1″ in diameter and seals against leakage and corrosion. It resists attack from most fuels, lubricants and industrial gases.

  • Vibra-Tite 146 Large Diameter/High Strength Threadlocker

    A high strength, large diameter anaerobic threadlocker designed to permanently lock fasteners. Resists attack from lubricants and most industrial liquids and gases.

  • Vibra-Tite 150 Medium Strength – Wicking Grade Threadlocker

    A fast cure, low viscosity wicking anaerobic threadlocker designed to seek voids in assembled components and cure anaerobically. Can be used as a post assembly application to prevent the loosening of metal threaded fasteners.

  • Viz-Torque applied to fastener assemblyVibra-Tite Viz-Torque 202 1 oz. Group

    Vibra-Tite Viz-Torque® 202

    Viz-Torque 202 Tamper Detection Marker is an inspection paste used to visually detect torque movement due to vibratory loosening or tampering of fittings, assemblies, nuts, bolts and studs. This quick-drying tamper proof torque marker identifies whether a part has been moved from its original position. Once dried in place, Viz-Torque 202 Tamper Detection Marker creates a seal for torque movement detection, which allows the dry and brittle material stripe to break, providing proof of fastener tampering or loosening. Viz-Torque 202 has good adhesion to most metals when applied to a clean, dry surface and is available in a selection of highly visible colors.

  • Vibra-Tite 208 Impact Resistant Light Cure Adhesive

    Dual cure impact resistant gel UV adhesive with excellent adhesion to most substrates.

  • Vibra-Tite 211 Glass Bonder Light Cure Adhesive

    Low viscosity glass bonder. Used to bond, seal or coat metal and glass components in industrial applications. Typical used include, but are not limited to, bonding electrical devices, appliance parts, and decorative components.

  • Hot

    Vibra-Tite VC-3 Threadmate

    Vibra-Tite VC-3 Threadmate is one of the most versatile threadlockers available on the market. An alternative to traditional liquid lockers which cure to form a hard bond, VC-3 is a proprietary blend of thermoplastic elastomer resins designed to remain flexible and absorb vibration. The combination of inert/non-reactive amorphous resins creates a tough, semi solid layer inside the threads of a mated joint. VC-3 damps the vibrational energy transferred between the threads of a mated fastener, preventing fastener loosening and loss of clamp load. These unique differences make VC-3 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite VC-4

    Vibra-Tite VC-4 exhibits similar performance to Vibra-Tite VC-3 except it contains a base solvent of Ethyl Acetate. VC-4 is one of the most versatile threadlockers available on the market. Unlike traditional liquid lockers which cure to form a hard bond, VC-4 is a blend of resins designed to remain flexible and absorb vibration. This unique difference makes VC-4 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite VC-5

    Vibra-Tite VC-5 exhibits similar performance to Vibra-Tite VC-3 except it contains a base solvent of Methyl Propyl Ketone. VC-5 is one of the most versatile threadlockers available on the market. Unlike traditional liquid lockers which cure to form a hard bond, VC-5 is a blend of resins designed to remain flexible and absorb vibration. This unique difference makes VC-5 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite VC-6

    Vibra-Tite VC-6 exhibits similar performance to Vibra-Tite VC-3 except it contains a base solvent of Dimethyl Carbonate. VC-6 is one of the most versatile threadlockers available on the market. Unlike traditional liquid lockers which cure to form a hard bond, VC-6 is a blend of resins designed to remain flexible and absorb vibration. This unique difference makes VC-6 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite 220 Glass Bonding Light Cure Adhesive

    Vibra-Tite 220 is a uv curing, modified methacrylate ester adhesive. It is designed for bonding glass to glass and glass to metal.

  • Vibra-Tite 229 Glass Bonding Light Cure Adhesive

    Medium-High viscosity UV glass bonder for glass and some metal; cures optically clear.

  • Vibra-Tite 230 Impact Resistant Light Cure Adhesive

    Impact resistant multi-cure UV adhesive for glass and steel bonding.

  • Vibra-Tite 240 No-Mix Structural Adhesive

    An activated acrylic adhesive designed for fast fixturing on metal and magnet materials and a no mix system. Used in applications that require very fast assembly.

  • Vibra-Tite 291 Acrylic UV – Visible w/Fluorescence Light Cure

    Low viscosity UV needle bonder for fiberglass, PS (polystyrene), ABS (Acrylonitrile Butyl Styrene), and acrylic.

  • Vibra-Tite 297 Acrylic UV – Visible w/Fluorescence Light Cure

    Low viscosity UV (light cure) needle bonder that bonds well with PVC, Acrylic, and glass.

  • Vibra-Tite 325 Plastic Threadlocker

    Vibra-Tite 325 is a cyanoacrylate threadlocker designed for small metal, and plastic fasteners. Because of its blue color it can be used as head marking tool for tamper proofing.

  • Vibra-Tite 330 Metal & Rubber Bonding Cyanoacrylate

    A single component, low to medium viscosity ethyl cyanoacrylate adhesive. Slow setting formulation designed for rubber to metal bonding.

  • Vibra-Tite 395 General Purpose Cyanoacrylate

    A single component low viscosity cyanoacrylate adhesive. Suitable for general-purpose applications on metals rubbers and plastics.

  • 42050 Thread Sealant Applied

    Vibra-Tite 420 Controlled Strength Thread Sealant

    An anaerobic thread sealing and thread locking compound with PTFE for pipe fittings. It is designed for sealing threaded fasteners that require disassembly with standard hand tools. It exhibits good temperature and solvent resistant.

  • Vibra-Tite 427 Medium Strength – Stainless Steel Thread Sealant

    Prevents leakage and loosening from shock and vibration. Particularly suitable for stainless steel.

  • Vibra-Tite 440 Pneumatic / Hydraulic Sealant Thread Sealant

    A fast curing high strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressures and vibrational loosening.

  • Vibra-Tite 442 Gel Thread Sealant

    Vibra-Tite 442 Hydraulic Fast Cure Gel Sealant

    A fast curing gel thread selant which withstands temperatures up to 300°F (149°C).

  • Vibra-Tite 444 Hydraulic Sealant – High Pressure Thread Sealant

    A medium strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressure and vibrational loosening.

  • Vibra-Tite 446 Refrigerant Sealant – High Pressure Thread Sealant

    Optimum resistance to solvents and refrigerants. Excellent chemical resistance on threaded connections handling ammonia, fluorocarbons and halides. Provides an instant seal between threaded fittings. Uncured sealant is miscible with hydraulic fluid and will not clog filter and other components in hydraulic systems.

  • 46050 Thread Sealant Applied

    Vibra-Tite 460 High Temp/Stainless Steel Thread Sealant

    Sets fast to give an instant low pressure seal of 100 psi and a high pressure seal when fully cured. This high strength product provides 100% sealing capability and does not shrink after curing, unlike more traditional solvent based pipe dopes. Contains PTFE.

  • DriveGrip for screw heads
    Hot

    Vibra-Tite DriveGrip

    Use DriveGrip and throw away your easy-outs, speed outs, reverse drill bits, and other screw extractors. DriveGrip is an anti cam-out fluid made of an inert liquid metallic grit, a drop of which is placed in the recessed head of a fastener before use. Immediately after application you can use your screw driver as normal, but will notice a significant reduction in the amount of effort it takes to prevent the driver from slipping. This is because DriveGrip works by creating additional friction between the fastener head and driver (up to 700% more!). It's so easy to use and so effective that you will be shocked you had never heard of it before.

  • Vibra-Tite 480 Multi-Purpose FBC Thread Sealant

    Vibra-Tite 480 Multi-Purpose – FBC Compatible Thread Sealant with PTFE is designed to lubricate and seal threaded connections. A non-curing and non-toxic formula, Vibra-Tite 480 contains no lead or harmful metals and can be used in potable water systems.

  • Non-Curing Thread Sealant

    Vibra-Tite 486 Non-Hardening Thread Sealant

    Vibra-Tite 486 Non-Curing Thread Sealant with PTFE is a creamy white paste for general purpose pipe and thread sealing. Typical applications include sealing threaded pipes, pipe fittings and flanges to seal against liquids and gases.

  • Vibra-Tite 530 General Purpose Retaining Compound

    The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Can be used where lubricity is needed to press fit parts or to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

  • Vibra-Tite 535 General Purpose – Gel Retaining Compound

    A controlled, high strength anaerobic gel retaining compound with good temperature and solvent resistance. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

  • Vibra-Tite 538 High Strength Retaining Compound

    A high strength, room curing anaerobic retaining compound that resists axial and radial loading.

  • vibra-tite 541 retaining compound

    Vibra-Tite 541 High Strength – Slip Fit Retaining Compound

    A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

  • Vibra-Tite 542 High Strength – Large Gap Retaining Compound

    A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

  • Vibra-Tite 546 Impact Resistant Retaining Compound

    A quick fixturing high strength flexible, anaerobic retaining compound designed to bond metal cylindrical assemblies. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 548 Rapid Curing Retaining Compound

    A medium viscosity, quick curing, high strength anaerobic retaining compound designed for tight-clearance, and slip-fit metal applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 550 Core Plug Sealant Retaining Compound

    A high strength anaerobic retaining compound designed for freeze, core, and cup plug applications. Used to seal core plugs in upper and lower manifolds and engine blocks. Typical applications include core plugs and cup plugs installed into engine blocks.

  • Vibra-Tite 560 High Strength – High Temperature Retaining Compound

    A high strength, high temperature, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 566 Gap Filling – For Worn Parts Retaining Compound

    A high viscosity, general purpose, anaerobic retaining compound used for press-fit and tight-clearance, and slip-fit metal applications. Exhibits good temperature and solvent resistance. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.

  • Vibra-Tite 567 High Temperature – Large Gap Retaining Compound

    A high temperature, high strength, large gap filling anaerobic retaining compound designed for metal cylindrical assembly applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • vibra-tite 611 primer

    Vibra-Tite 611 Excel Primer N

    General purpose primer. Significantly speeds up the cure time of anaerobic threadlockers when assembling metal parts that are cold, have large gaps or deep threads. Primers are recommended when assembling metal parts with inactive surfaces such as stainless, galvanized steel and zinc.

  • vibra-tite 612 primer

    Vibra-Tite 612 Excel Primer T

    Fast acting primer. Significantly speeds up the cure time of anaerobic threadlockers when assembling metal parts that are cold, have large gaps or deep threads. Primers are recommended when assembling metal parts with inactive surfaces such as stainless, galvanized steel and zinc.

  • Vibra-Tite 709 Flexible Gasket Maker

    Vibra-Tite 709 Flexible Gasket Maker

    Provides resistance to low pressures after assembly of flanges.  Seals between rigid metal surfaces and flanges such as valve covers and gearbox casings. Can be used with or without pre-cut, pre-formed gaskets.

  • Vibra-Tite 710 High Temperature Rigid Flange Sealant Gasket Maker

    Vibra-Tite 710 Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. Provides an instant low pressure seal. This product can be used with or without pre-cut, pre-formed gaskets.

  • vibra-tite 724 gasket maker

    Vibra-Tite 724 Fast Flange Sealant Gasket Maker

    Single component, medium strength, thixotropic, anaerobic sealant. Provides a fast low pressure seal between rigid metal faces and flanges and is suitable as a replacement for a variety of pre-formed or pre-cut gastkets. The thixotropic behavior of this material minimizes migration of material following application.

  • Vibra-Tite 730 Flexible Solvent Resistant Gasket Maker

    High viscosity, single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. Provides an instant low pressure seal. Seals joints between rigid metal faces and flanges such as valve covers and gearbox casings.

  • Vibra-Tite 732 Flexible Gasket Maker

    A tough flexible formed-in-place gasket. Provides an instant low pressure seal. For fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, chainsaws, lawn mowers etc.

  • Vibra-Tite 906 Marine Grade Anti-Seize

    Protects assemblies exposed to fresh and salt water. Works well in high-humidity conditions. Has no metals and is not a marine pollutant. Contains Molybdenum Disulfide for extreme pressure applications. Use in extreme temperatures up to 2,600°F (1,427°C).

  • Vibra-Tite 9070 Aluminum Anti-Seize

    Ideal for all metals. Prevents seizing, galling, pitting, excessive wear, and corrosion. The lubricating formulation is a protective paste consisting of find flakes of graphite suspended in a blend of lubricants and oils.

  • Vibra-Tite 9071 Copper Anti-Seize

    Ideal for softer metals. Prevents seizing, galling, pitting, excessive wear, and corrosion. The lubricating formulation is a protective paste consisting of fine flakes of copper and graphite suspended in a blend of lubricants and oils.

  • Vibra-Tite 9072 Nickel Anti-Seize

    Ideal for extreme temperatures. Prevents seizing, galling, pitting, excessive wear, and corrosion. Copper and graphite free base. Resistant to harsh chemical environments. Excellent for stainless steel and other metal fittings.

  • vibra-tite food grade anti-seize

    Vibra-Tite 908 Food Grade Anti-Seize

    Vibra-Tite Food Grade Anti-Seize is specifically developed for use in applications where incidental food contact is possible. Protects metal parts from seizure, galling, rust, corrosion and heat freeze by adhering to the metal surface. Meets NSF (H1)

  • Vibra-Tite 920 High Peel / High Shear 2 Part Epoxy

    Vibra-Tite 920 is a medium viscosity, industrial grade epoxy adhesive with extended work life. This system forms a good adhesion to thermoplastics with high peel and shear strength. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

  • Vibra-Tite 923 Aluminum Bonding Epoxy

    Vibra-Tite 923 is a toughened, medium viscosity, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature to form a tough, off-white, bond line that provides high adhesive strength.

  • vibra-tite epoxy 927

    Vibra-Tite 927 Medium Viscosity / High Strength 2 Part Epoxy

    A toughened, medium viscosity, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature to form a tough, off-white, bond line that provides high adhesive strength.

  • Vibra-Tite 941 Epoxy

    Vibra-Tite 941 is a medium-viscosity general purpose two-part epoxy compound that is designed to form a resilient encapsulant with good surface finish and high bond strength to thermoplastics. Vibra-Tite 941 is recommended when potting assemblies with narrow gaps and tight spaces.

  • Vibra-Tite 942 Epoxy

    Vibra-Tite 942 is a filled, low shrinkage version of Vibra-Tite 941 general purpose encapsulating compound.  Designed to form a resilient encapsulant with good surface finish and high bond strength to thermoplastics,  Vibra-Tite 942 is recommended when potting assemblies with narrow gaps and tight spaces.

  • vibra-tite 935 epoxy

    Vibra-Tite 935 Low Viscosity General Purpose Potting 2 Part Epoxy

    Vibra-Tite 935 is a low-viscosity general purpose potting compound that is designed to form a resilient, long work time potting compound with good surface finish and bond strength to thermoplastics.

  • Thermal Defender® TD-97

    TD-97 is a dry film ceramic coating which is sprayed onto parts to protect them from metal weld spatter. Quick and easy, it can be applied and dried in under a minute and is then ready for immediate use.

  • Vibra-Tite 990 Flexible Toughened 2 Part Epoxy

    Vibra- Tite 990 is a high viscosity, industrial grade epoxy adhesive with extended work life. This system forms a resilient, long work time adhesive with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

  • Vibra-Tite 992 Copper RTV Silicone

    Vibra-Tite 992 Copper RTV Silicone Gasket Maker

    A one-part neutral cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.

  • Vibra-Tite 99330 Silicone

    Vibra-Tite 993 Heavy Body Black Silicone Gasket Maker

    A one-part neutral cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.

  • Vibra-Tite 99530 Silicone

    Vibra-Tite 995 Clear RTV Silicone Sealant

    A one-part general purpose acetoxy cure silicone sealant that cures in the presence of atmospheric moisture to produce a durable and water proof flexible silicone rubber compound. Resists oil, water, weather, vibration, grease. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl.

  • Vibra-Tite 99630 Silicone

    Vibra-Tite 996 Red RTV Silicone Gasket Maker

    A one-part acetoxy cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.

  • Vibra-Tite 997 Blue RTV Silicone

    Vibra-Tite 997 Blue RTV Silicone Gasket Maker

    A one-part neutral cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.

  • Vibra-Tite 998 Black RTV Silicone

    Vibra-Tite 998 Black RTV Silicone Gasket Maker

    A one-part acetoxy cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.

  • Vibra-Tite 999 Grey RTV Silicone Gasket Maker

    A one-part neutral cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.

  • vibra-tite pb 300 structural adhesive

    Vibra-Tite PB300 MMA – All Purpose – Fast Set

    General purpose. Adheres to most substrates. Rapid cure time. No surface preparation. High strength. High modulus. 100% reactive. Excellent resistance to hydrocarbons, acids and bases (3-10 pH), and salt solutions. Use on ABS, Acrylics, Epoxies, FRP, Gelcoats, Polyesters, PVC, Polystyrene, Urethanes, and Vinyl Esters.