31200000 | Product UNSPSC | Vibra-Tite

Home
>
Product

Vibra-Tite 111 Low Strength Threadlocker

A low strength anaerobic threadlocker designed for locking threaded fasteners smaller than 1/4” in diameter, which require disassembly with standard hand tools. Also works on set screws, and screws that have a long engagement length.

Select options
Vibra-Tite 121 Medium Strength Threadlocker

A medium strength anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance.

Select options
Vibra-Tite 122 Oil Tolerant Threadlocker

A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.

Select options
Vibra-Tite 123 Medium Strength High Temp Threadlocker

Typical uses include locking nuts or bolts ranging from 1/4” to 3/4” (6-20 mm) in diameter at continuous temperatures up to 450°F.

Select options
Hot

Vibra-Tite 125 Medium Strength Gel Threadlocker

A medium strength anaerobic gel threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance. No-drip gel formula.

Select options
Vibra-Tite 131 High Strength Threadlocker

A high strength anaerobic threadlocker designed to permanently lock fasteners up to 1'' in diameter. Exhibits good temperature and solvent resistance.

Select options
Vibra-Tite 132 High Strength Primerless Threadlocker

A high strength and high temperature threadlocker designed for permanently locking or sealing nuts and bolts up 1” diameter. Primerless, oil tolerant formula will cure even on passive materials such as stainless steel.

Select options
Vibra-Tite 135 High Strength Gel Threadlocker

A high strength anaerobic gel threadlocker designed to permanently lock fasteners up to 1” in diameter. Exhibits good temperature and solvent resistance. No-drip gel formulation makes it easy to apply.

Select options
Vibra-Tite 137 High Temp/High Strength Threadlocker

A high strength and high temperature anaerobic threadlocker designed to permanently lock fasteners up to 1 1/2'' in diameter. Joins threaded parts exposed to operating temperatures up to 450°F

Select options
Vibra-Tite 140 High Strength Threadlocker

A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks and seals fasteners from up to 1'' in diameter.

Select options
Vibra-Tite 141 High Strength Threadlocker

A green general purpose threadlocker for permanent locking of threaded assemblies. 141 works on fasteners up to 1″ in diameter and seals against leakage and corrosion. It resists attack from most fuels, lubricants and industrial gases.

Select options
Vibra-Tite 146 Large Diameter/High Strength Threadlocker

A high strength, large diameter anaerobic threadlocker designed to permanently lock fasteners. Resists attack from lubricants and most industrial liquids and gases.

Select options
Vibra-Tite 150 Medium Strength – Wicking Grade Threadlocker

A fast cure, low viscosity wicking anaerobic threadlocker designed to seek voids in assembled components and cure anaerobically. Can be used as a post assembly application to prevent the loosening of metal threaded fasteners.

Select options
Vibra-Tite 208 Impact Resistant Light Cure Adhesive

Dual cure impact resistant gel UV adhesive with excellent adhesion to most substrates.

Select options
Vibra-Tite 207 UV/Anaerobic Dual Cure Adhesive and Sealant

Vibra-Tite® 207 is a low viscosity UV/Anaerobic dual cure adhesive and sealant for sealing ammo.

Select options
Vibra-Tite 209 Low Intensity UV Light Cure Adhesive

Medium-High viscosity UV (light cure) adhesive with excellent adhesion to most substrate types.

Select options
Vibra-Tite 211 Glass Bonder Light Cure Adhesive

Low viscosity glass bonder. Used to bond, seal or coat metal and glass components in industrial applications. Typical used include, but are not limited to, bonding electrical devices, appliance parts, and decorative components.

Select options
Vibra-Tite 215 Potting Light Cure Adhesive

Vibra-Tite 215 is a uv curing, modified methacrylate ester adhesive with secondary heat cure. Vibra-Tite 215 is designed for UV potting and bonding glass to plastic substrates.

Select options
Vibra-Tite 220 Glass Bonding Light Cure Adhesive

Vibra-Tite 220 is a uv curing, modified methacrylate ester adhesive. It is designed for bonding glass to glass and glass to metal.

Select options
Vibra-Tite 224 High Impact Structural Adhesive

Structural acrylic adhesive that is designed to bond a wide range of substrates such as metal, wood and some plastics. Use with structural activator, such as Vibra-Tite 638.

Select options
Vibra-Tite 225 No-Mix Structural Adhesive

An activated Acrylic adhesive designed for fast fixturing on metal and ceramic materials. Applications include bonding metal or ceramic close fitting rigid parts which are exposed to thermal cycling, like motor assemblies.

Select options
Vibra-Tite 226 No-Mix Structural Adhesive

Fast fixturing applications.

Select options
Vibra-Tite 229 Glass Bonding Light Cure Adhesive

Medium-High viscosity UV glass bonder for glass and some metal; cures optically clear.

Select options
Vibra-Tite 230 Impact Resistant Light Cure Adhesive

Impact resistant multi-cure UV adhesive for glass and steel bonding.

Select options
Vibra-Tite 233 No-Mix Toughened Structural Adhesive

Rough or porous surfaces.

Select options
Vibra-Tite 240 No-Mix Structural Adhesive

An activated acrylic adhesive designed for fast fixturing on metal and magnet materials and a no mix system. Used in applications that require very fast assembly.

Select options
Vibra-Tite 250 Doming Plastics Light Cure Adhesive

Vibra-Tite 250 is a single component, medium viscosity UV coating and structural adhesive suitable for bonding glass to glass or glass to plastic. It is suitable for use as a doming resin on glass and some plastics and composites. This product cures when exposed to ultraviolet radiation. When cured, it is highly resistant to vibration and impact forces.

Select options
Vibra-Tite 265 Tacking Light Cure Adhesive

A medium viscosity light tacking UV adhesive for glass, steel and plastic.

Select options
Vibra-Tite 274 No-Mix Structural Adhesive

RVM Rear view mirror bonder.

Select options
Vibra-Tite 291 Acrylic UV – Visible w/Fluorescence Light Cure

Low viscosity UV needle bonder for fiberglass, PS (polystyrene), ABS (Acrylonitrile Butyl Styrene), and acrylic.

Select options
Vibra-Tite 294 Plastic Bonding Light Cure Adhesive

Medium viscosity UV (light cure) adhesive with excellent adhesion to most substrate types.

Select options
Vibra-Tite 297 Acrylic UV – Visible w/Fluorescence Light Cure

Low viscosity UV (light cure) needle bonder that bonds well with PVC, Acrylic, and glass.

Select options
Vibra-Tite 301 Surface Insensitive – General Cyanoacrylate

A single component medium viscosity cyanoacrylate adhesive. Designed for wood, leather, and fiberglass mat.

Select options
Vibra-Tite 303 Low Odor & Low Bloom – Gap Filling Cyanoacrylate

A single component, high viscosity cyanoacrylate adhesive. No-odor and non-blooming characteristics make this product user friendly when vapor control is an issue.

Select options
Vibra-Tite 304 General Purpose – O-Ring Bonder Cyanoacrylate

A single component, low to medium viscosity cyanoacrylate adhesive. Suitable for general purpose applications on metals, rubbers, and plastics.

Select options
Vibra-Tite 306 Surface Insensitive – Wicking Cyanoacrylate

A single component low viscosity cyanoacrylate adhesive. It is an extremely fast setting adhesive, ideal for bonding preassembled parts. Ideal for bonding preassembled parts, rubber and leather. It is particularly designed to set and adhere rapidly to inactive surfaces.

Select options
Vibra-Tite 308 Low Odor & Low Bloom – Wicking Cyanoacrylate

A single component, low viscosity cyanoacrylate adhesive. No-odor and non-blooming characteristics make this product user friendly when vapor control is an issue.

Select options
Vibra-Tite 309 General Purpose Gel Cyanoacrylate

A single component high viscosity gel cyanoacrylate adhesive. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.

Select options
Vibra-Tite 310 Rubber Toughened – Gap Filling Cyanoacrylate

A single component black, high viscosity, rubbertoughened ethyl cyanoacrylate adhesive. Provides superior shock and thermal resistance when bonding in harsh environments

Select options
Vibra-Tite 311 Rubber Toughened – Shock & Impact Resistant Cyanoacrylate

A single component high viscosity, rubber-toughened ethyl cyanoacrylate adhesive. Provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments.

Select options
Vibra-Tite 314 Plastic Bonder Cyanoacrylate

A single component low to medium viscosity cyanoacrylate that is used for a variety of bonding applications. Ideally suited for bonding plastics and rubber to themselves or various combinations. It is recommended for use on small gaps or relatively smooth even surfaces.

Select options
Vibra-Tite 316 Gap Filling Plastic Bonding Cyanoacrylate

A single component medium to high viscosity cyanoacrylate with extended drying times for filling large gaps with absorbent materials. Versatile and will bond most plastics, rubbers, and metals.

Select options
Vibra-Tite 320 Wicking Type Plastic Bonding Cyanoacrylate

A single component low viscosity cyanoacrylate adhesive. It is a fast setting wicking grade adhesive ideal for bonding preassembled parts.

Select options
Vibra-Tite 322 Gap Filling Plastic Bonding Cyanoacrylate

A single component high viscosity cyanoacrylate adhesive with a quicker setting speed than most high viscosity materials. Suitable for all general purpose bonding.

Select options
Vibra-Tite 325 Plastic Threadlocker

Vibra-Tite 325 is a cyanoacrylate threadlocker designed for small metal, and plastic fasteners. Because of its blue color it can be used as head marking tool for tamper proofing.

Select options
Vibra-Tite 330 Metal & Rubber Bonding Cyanoacrylate

A single component, low to medium viscosity ethyl cyanoacrylate adhesive. Slow setting formulation designed for rubber to metal bonding.

Select options
Vibra-Tite 331 Surface Insensitive – Gap Filling Cyanoacrylate

A single component medium viscosity cyanoacrylate adhesive. Suitable for general-purpose bonding but provides excellent strength and speed on all rubber compounds.

Select options
Vibra-Tite 344 Wire Tacking Cyanoacrylate

A single component, medium to high viscosity cyanoacrylate adhesive. Designed for general purpose bonding on all types of substrates where gap filling is required.

Select options
Vibra-Tite 347 Surface Insensitive – General Purpose Cyanoacrylate

A single component, medium to high viscosity cyanoacrylate adhesive. It is particularly designed to set and adhere rapidly to inactive surfaces such as wood, leather and fiberglass mat. Offers viscosity and flow characteristics that are ideal for filling medium gaps.

Select options
Vibra-Tite 354 Surface Insensitive – Porous Gel Cyanoacrylate

A single component high viscosity gel cyanoacrylate adhesive. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.

Select options
Vibra-Tite 355 Surface Insensitive – High Viscosity Cyanoacrylate

A surface insensitive, non-runny, instant adhesive that is not a gel. Single component, high viscosity cyanoacrylate adhesive. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.

Select options
Vibra-Tite 371 Rubber Bonder Cyanoacrylate

A single component, extremely fast setting low viscosity cyanoacrylate adhesive. Specifically formulated for all types of rubber bonding applications.

Select options
Vibra-Tite 372 Rubber Bonding Cyanoacrylate

A single component, fast setting medium viscosity cyanoacrylate adhesive that works well for bonding rubber.

Select options
Vibra-Tite 381 Gap Filling – Wire Tacking Cyanoacrylate

A single component high viscosity cyanoacrylate adhesive for electronics. Offers gap-filling and thermal cycling resistance.

Select options
Vibra-Tite 388 Rubber Toughened – Shock/Temp Resistant Cyanoacrylate

A single component black, medium viscosity, rubber toughened ethyl cyanoacrylate adhesive. Provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments.

Select options
Vibra-Tite 395 General Purpose Cyanoacrylate

A single component low viscosity cyanoacrylate adhesive. Suitable for general-purpose applications on metals rubbers and plastics.

Select options
Vibra-Tite 420 Controlled Strength Thread Sealant

An anaerobic thread sealing and thread locking compound with PTFE for pipe fittings. It is designed for sealing threaded fasteners that require disassembly with standard hand tools. It exhibits good temperature and solvent resistant.

Select options
Vibra-Tite 427 Medium Strength – Stainless Steel Thread Sealant

Prevents leakage and loosening from shock and vibration. Particularly suitable for stainless steel.

Select options
Vibra-Tite 440 Pneumatic / Hydraulic Sealant Thread Sealant

A fast curing high strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressures and vibrational loosening.

Select options
Vibra-Tite 442 Hydraulic Fast Cure Gel Sealant

A fast curing gel thread selant which withstands temperatures up to 300°F (149°C).

Select options
Vibra-Tite 444 Hydraulic Sealant – High Pressure Thread Sealant

A medium strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressure and vibrational loosening.

Select options
Vibra-Tite 446 Refrigerant Sealant – High Pressure Thread Sealant

Optimum resistance to solvents and refrigerants. Excellent chemical resistance on threaded connections handling ammonia, fluorocarbons and halides. Provides an instant seal between threaded fittings. Uncured sealant is miscible with hydraulic fluid and will not clog filter and other components in hydraulic systems.

Select options
Vibra-Tite 460 High Temp/Stainless Steel Thread Sealant

Sets fast to give an instant low pressure seal of 100 psi and a high pressure seal when fully cured. This high strength product provides 100% sealing capability and does not shrink after curing, unlike more traditional solvent based pipe dopes. Contains PTFE.

Select options
Vibra-Tite 480 Multi-Purpose FBC Thread Sealant

Vibra-Tite 480 Multi-Purpose – FBC Compatible Thread Sealant with PTFE is designed to lubricate and seal threaded connections. A non-curing and non-toxic formula, Vibra-Tite 480 contains no lead or harmful metals and can be used in potable water systems.

Select options
Vibra-Tite 486 Non-Hardening Thread Sealant

Vibra-Tite 486 Non-Curing Thread Sealant with PTFE is a creamy white paste for general purpose pipe and thread sealing. Typical applications include sealing threaded pipes, pipe fittings and flanges to seal against liquids and gases.

Select options
Vibra-Tite 530 General Purpose Retaining Compound

The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Can be used where lubricity is needed to press fit parts or to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

Select options
Vibra-Tite 535 General Purpose – Gel Retaining Compound

A controlled, high strength anaerobic gel retaining compound with good temperature and solvent resistance. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

Select options
Vibra-Tite 538 High Strength Retaining Compound

A high strength, room curing anaerobic retaining compound that resists axial and radial loading.

Select options
Vibra-Tite 541 High Strength – Slip Fit Retaining Compound

A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

Select options
Vibra-Tite 542 High Strength – Large Gap Retaining Compound

A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

Select options
Vibra-Tite 546 Impact Resistant Retaining Compound

A quick fixturing high strength flexible, anaerobic retaining compound designed to bond metal cylindrical assemblies. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 548 Rapid Curing Retaining Compound

A medium viscosity, quick curing, high strength anaerobic retaining compound designed for tight-clearance, and slip-fit metal applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 550 Core Plug Sealant Retaining Compound

A high strength anaerobic retaining compound designed for freeze, core, and cup plug applications. Used to seal core plugs in upper and lower manifolds and engine blocks. Typical applications include core plugs and cup plugs installed into engine blocks.

Select options
Vibra-Tite 560 High Strength – High Temperature Retaining Compound

A high strength, high temperature, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 566 Gap Filling – For Worn Parts Retaining Compound

A high viscosity, general purpose, anaerobic retaining compound used for press-fit and tight-clearance, and slip-fit metal applications. Exhibits good temperature and solvent resistance. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.

Select options
Vibra-Tite 567 High Temperature – Large Gap Retaining Compound

A high temperature, high strength, large gap filling anaerobic retaining compound designed for metal cylindrical assembly applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 709 Flexible Gasket Maker

Provides resistance to low pressures after assembly of flanges. Seals between rigid metal surfaces and flanges such as valve covers and gearbox casings. Can be used with or without pre-cut, pre-formed gaskets.

Select options
Vibra-Tite 710 High Temperature Rigid Flange Sealant Gasket Maker

Vibra-Tite 710 Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. Provides an instant low pressure seal. This product can be used with or without pre-cut, pre-formed gaskets.

Select options
Vibra-Tite 730 Flexible Solvent Resistant Gasket Maker

High viscosity, single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. Provides an instant low pressure seal. Seals joints between rigid metal faces and flanges such as valve covers and gearbox casings.

Select options
Vibra-Tite 732 Flexible Gasket Maker

A tough flexible formed-in-place gasket. Provides an instant low pressure seal. For fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, chainsaws, lawn mowers etc.

Select options
Vibra-Tite 801 Urethane

Vibra-Tite 801 is a 1-component liquid adhesive based on polyurethane. It is a moisture-curing, long open time structural assembly system. Unlike contact adhesives, which require the coating of both substrate surfaces, Vibra-Tite 801 requires only a single side. There is no need for additional handling and expensive drying ovens to flash off solvents before engaging the bond.

Select options
Vibra-Tite 801FC Fast Curing Urethane

Versatile urethane for bonding wood, metal glass, stone, brick, fiberglass, carbon, foam and more. 100% waterproof. Temperature resistant. Sandable, paintable, stainable. Low foam.

Select options
Vibra-Tite 801SS Stainless Steel Urethane

Versatile urethane for bonding wood, metal glass, stone, brick, fiberglass, carbon, foam and more. 100% waterproof. Temperature resistant. Sandable, paintable, stainable. Low foam.

Select options
Vibra-Tite 802 Polyurethane

Vibra-Tite 802 is a 2-component lamination adhesive system based on polyurethane. Vibra-Tite 803 HARDENER is a polyol blend which can be colored with pigment, and Vibra-Tite 802 RESIN is a formulated isocyante with exceptional bonding and sealing properties to provide exceptional adhesion to a wide variety of engineering plastics, metals or other substrates. This system can be used with plural component extrusion equipment, or standard 1:1 meter mix (volumetric) dispensing machines that use static mixers. Its mixed viscosity of ~3500 cps at 75°F allows Vibra-Tite 802 to be spray applied using heavy particle size atomization process.

Select options
Vibra-Tite 905 Quick Cure 2 Part Epoxy

Vibra-Tite 905 is a fast setting adhesive that cures at temperatures as low as 41°F/5°C. For bonding and repairing small parts.

Select options
Vibra-Tite 910G 5-Minute Two Part Epoxy

Vibra-Tite 910G Epoxy is a 2-part system that forms a strong bond when cured. While flowing through the mix nozzle (sold separately), the blue resin and yellow hardener combine and dispense as a solid green color, providing visual proof of a thoroughly mixed epoxy. Once applied, this material allows 4-6 minutes of positioning time and can be handled in 1 hour. This product is formulated as a gel, which makes it ideal for both vertical and horizontal surfaces.

Select options
Vibra-Tite 911 Epoxy

Epoxy VIBRA-TITE 911 is a fast setting adhesive that cures at temperatures as low as 41°F/5°C. For bonding and repairing small parts. Competes with Fastweld 10

Select options
Vibra-Tite 915 Epoxy

VIBRA-TITE 915 is a low-viscosity general purpose potting compound that is designed to form a resilient, long work time potting compound with good surface finish and bond strength to thermoplastics. Competes with Hysol E-60NC

Select options
Vibra-Tite 916 Epoxy

VIBRA-TITE 916 is a toughened, medium viscosity, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature to form a tough, off-white, bond line that provides high adhesive strength. Competes with Hysol E-60HP

Select options
Vibra-Tite 920 High Peel / High Shear 2 Part Epoxy

Vibra-Tite 920 is a medium viscosity, industrial grade epoxy adhesive with extended work life. This system forms a good adhesion to thermoplastics with high peel and shear strength. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

Select options
Vibra-Tite 921 Plastic Bonding Epoxy

Vibra-Tite 921 is a medium viscosity, industrial grade epoxy adhesive with extended work life. This system forms a good adhesion to thermoplastics with high peel and shear strength. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

Select options
Vibra-Tite 923 Aluminum Bonding Epoxy

Vibra-Tite 923 is a toughened, medium viscosity, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature to form a tough, off-white, bond line that provides high adhesive strength.

Select options
Vibra-Tite 924 Epoxy

Vibra-Tite 924 is a general purpose, medium viscosity, two-component epoxy adhesive system used for applications which require strong, durable, chemically and environmentally resistant bonds, high viscosity, with an extended work life. This system forms a resilient, long work time adhesive with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance. Competes with Lord 305

Select options
Vibra-Tite 927 Medium Viscosity / High Strength 2 Part Epoxy

A toughened, medium viscosity, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature to form a tough, off-white, bond line that provides high adhesive strength.

Select options
Vibra-Tite 932 Encapsulating Epoxy

Vibra-Tite 932 is two-part epoxy encapsulant and adhesive. This system forms a resilient, long work time potting and encapsulant material with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

Read more
Vibra-Tite 933 Ignition Coil Impregnation and Encapsulation Epoxy

Vibra-Tite 933 is a long working life, heat curing, and two component formulation. It was designed especially for potting high voltage coils. The combination of low viscosity, excellent high temperature electrical properties and good thermal shock resistance makes this epoxy ideal for this application.

Select options
Vibra-Tite 934 Induction Cure Epoxy

Vibra-Tite 934 is a single-part induction cured epoxy adhesive with excellent adhesion to metal oily surfaces as well as composite materials. Can be used to enhance joint stiffness and joint durability. The high bond strength of this adhesive allows it to replace mechanical fasteners, soldering, brazing, or welding. Requires heat in the range of 120°C to 200°C. Vibra-Tite 934 is non-sagging allowing use with large gaps and on vertical surfaces.

Select options
Vibra-Tite 935 Low Viscosity General Purpose Potting 2 Part Epoxy

Vibra-Tite 935 is a low-viscosity general purpose potting compound that is designed to form a resilient, long work time potting compound with good surface finish and bond strength to thermoplastics.

Select options
Vibra-Tite 941 Epoxy

Vibra-Tite 941 is a medium-viscosity general purpose two-part epoxy compound that is designed to form a resilient encapsulant with good surface finish and high bond strength to thermoplastics. Vibra-Tite 941 is recommended when potting assemblies with narrow gaps and tight spaces.

Select options
Vibra-Tite 942 Epoxy

Vibra-Tite 942 is a filled, low shrinkage version of Vibra-Tite 941 general purpose encapsulating compound. Designed to form a resilient encapsulant with good surface finish and high bond strength to thermoplastics, Vibra-Tite 942 is recommended when potting assemblies with narrow gaps and tight spaces.

Select options
Vibra-Tite 951 Pourable Aluminum Epoxy

Vibra-Tite 951 is a two component, aluminum filled epoxy for making molds, patterns, and holding fixtures. When the two components are properly mixed, the epoxy cures at room temperature to a silvery grey material that can be machined, drilled, sanded or tapped. Competes with Devcon Aluminum Liquid

Select options
Vibra-Tite 989 Multi-Purpose Polyurethane

Versatile urethane for bonding wood, metal glass, stone, brick, fiberglass, carbon, foam and more. 100% waterproof. Temperature resistant. Sandable, paintable, stainable. Low foam.

Select options
Vibra-Tite 990 Flexible Toughened 2 Part Epoxy

Vibra- Tite 990 is a high viscosity, industrial grade epoxy adhesive with extended work life. This system forms a resilient, long work time adhesive with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

Select options
Vibra-Tite Bench Pack

Bench Pack® 5 is a handy assortment of our most popular threadlockers, a retaining compound, and DriveGrip anti cam-out fluid, in a light weight , plastic container.
Contents:
Vibra-Tite 121 – Medium/Removable Strength Threadlocker
Vibra-Tite 140 – High Strength Threadlocker
Vibra-Tite 150 – Wicking Grade/Medium Strength Threadlocker
Vibra-Tite 541 – High Strength Retaining Compound
Vibra-Tite DriveGrip – Anti cam-out Fluid

‹ › ×