Vibra-Tite Green Colored Products

  • vibra-tite 141 threadlocker

    Vibra-Tite 141 High Strength Threadlocker

    A green general purpose threadlocker for permanent locking of threaded assemblies. 141 works on fasteners up to 1″ in diameter and seals against leakage and corrosion. It resists attack from most fuels, lubricants and industrial gases.

  • Vibra-Tite 150 Medium Strength – Wicking Grade Threadlocker

    A fast cure, low viscosity wicking anaerobic threadlocker designed to seek voids in assembled components and cure anaerobically. Can be used as a post assembly application to prevent the loosening of metal threaded fasteners.

  • Viz-Torque applied to fastener assemblyVibra-Tite Viz-Torque 202 1 oz. Group

    Vibra-Tite Viz-Torque® 202

    Viz-Torque 202 Tamper Detection Marker is an inspection paste used to visually detect torque movement on fittings, assemblies, nuts, bolts and studs. This quick-drying tamper proof marker identifies whether a part has been moved from its original position. Once dried in place, Viz-Torque 202 Tamper Detection Marker is dry and brittle, which allows the material stripe to break, providing proof of fastener tampering or loosening. Viz-Torque 202 has good adhesion to most metals when applied to a clean, dry surface and is available in a selection of highly visible colors.

  • Vibra-Tite 530 General Purpose Retaining Compound

    Vibra-Tite 530 General Purpose Retaining Compound

    The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Can be used where lubricity is needed to press fit parts or to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

  • Vibra-Tite 535 General Purpose – Gel Retaining Compound

    A controlled, high strength anaerobic gel retaining compound with good temperature and solvent resistance. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

  • Vibra-Tite 538 High Strength Retaining Compound

    A high strength, room curing anaerobic retaining compound that resists axial and radial loading.

  • vibra-tite 541 retaining compound

    Vibra-Tite 541 High Strength – Slip Fit Retaining Compound

    A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

  • Vibra-Tite 542 High Strength – Large Gap Retaining Compound

    A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

  • Vibra-Tite 546 Impact Resistant Retaining Compound

    A quick fixturing high strength flexible, anaerobic retaining compound designed to bond metal cylindrical assemblies. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 548 Rapid Curing Retaining Compound

    A medium viscosity, quick curing, high strength anaerobic retaining compound designed for tight-clearance, and slip-fit metal applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 560 High Strength – High Temperature Retaining Compound

    A high strength, high temperature, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 567 High Temperature – Large Gap Retaining Compound

    A high temperature, high strength, large gap filling anaerobic retaining compound designed for metal cylindrical assembly applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 910 5-Minute Two Part Epoxy

    A 2-part system forms a strong bond when cured. 4-6 minutes of positioning time and can be handled in 1 hour. Formulated as a gel, which makes it idea for both vertical and horizontal surfaces. Green color is the combination of blue resin and yellow hardener. Once correctly mixed they will combine to a green color.