Clear | Vibra-Tite
-
Vibra-Tite 603 Hand Sanitizer (IPA)
Isopropyl Alcohol Antiseptic 75%. Topical Solution. Hand Sanitizer. Non-sterile Solution. For consumer use.
-
Vibra-Tite 604 Antiseptic Hand Rub (IPA)
Isopropyl Alcohol Antiseptic 75%. Topical Solution. Anti-Septic Hand Rub. Non-sterile Solution. For Health Care Personnel.
-
Vibra-Tite 605 Hand Sanitizer (Ethanol)
Alcohol Antiseptic 80%. Topical Solution. Hand Sanitizer. Non-sterile Solution. For consumer use.
-
Vibra-Tite 606 Antiseptic Hand Rub (Ethanol)
Alcohol Antiseptic 80%. Topical Solution. Anti-Septic Hand Rub. Non-sterile Solution. For Health Care Personnel.
-
Vibra-Tite 614, IPA 99%, USP Grade Surface Sanitizer
Isopropyl Alcohol 99%. USP Grade. Sanitizes and disinfects surfaces.
-
Vibra-Tite 207 UV/Anaerobic Dual Cure Adhesive and Sealant
Vibra-Tite® 207 is a low viscosity UV/Anaerobic dual cure adhesive and sealant for sealing ammo.
-
Vibra-Tite 211 Glass Bonder Light Cure Adhesive
Low viscosity glass bonder. Used to bond, seal or coat metal and glass components in industrial applications. Typical used include, but are not limited to, bonding electrical devices, appliance parts, and decorative components.
-
Vibra-Tite 215 Potting Light Cure Adhesive
Vibra-Tite 215 is a uv curing, modified methacrylate ester adhesive with secondary heat cure. Vibra-Tite 215 is designed for UV potting and bonding glass to plastic substrates.
-
Vibra-Tite VC-6
Vibra-Tite VC-6 exhibits similar performance to Vibra-Tite VC-3 except it contains a base solvent of Dimethyl Carbonate. VC-6 is one of the most versatile threadlockers available on the market. Unlike traditional liquid lockers which cure to form a hard bond, VC-6 is a blend of resins designed to remain flexible and absorb vibration. This unique difference makes VC-6 coated fasteners truly adjustable, removable, and reusable.
-
Vibra-Tite 224 High Impact Structural Adhesive
Structural acrylic adhesive that is designed to bond a wide range of substrates such as metal, wood and some plastics.
-
Vibra-Tite 250 Doming Plastics Light Cure Adhesive
Vibra-Tite 250 is a single component, medium viscosity UV coating and structural adhesive suitable for bonding glass to glass or glass to plastic. It is suitable for use as a doming resin on glass and some plastics and composites. This product cures when exposed to ultraviolet radiation. When cured, it is highly resistant to vibration and impact forces.
-
Vibra-Tite 265 Tacking Light Cure Adhesive
A medium viscosity light tacking UV adhesive for glass, steel and plastic.
-
Vibra-Tite 294 Plastic Bonding Light Cure Adhesive
Medium viscosity UV (light cure) adhesive with excellent adhesion to most substrate types.
-
Vibra-Tite 301 Surface Insensitive – General Cyanoacrylate
A single component medium viscosity cyanoacrylate adhesive. Designed for wood, leather, and fiberglass mat.
-
Vibra-Tite 303 Low Odor & Low Bloom – Gap Filling Cyanoacrylate
A single component, high viscosity cyanoacrylate adhesive. No-odor and non-blooming characteristics make this product user friendly when vapor control is an issue.
-
Vibra-Tite 304 General Purpose – O-Ring Bonder Cyanoacrylate
A single component, low to medium viscosity cyanoacrylate adhesive. Suitable for general purpose applications on metals, rubbers, and plastics.
-
Vibra-Tite 306 Surface Insensitive – Wicking Cyanoacrylate
A single component low viscosity cyanoacrylate adhesive. It is an extremely fast setting adhesive, ideal for bonding preassembled parts. Ideal for bonding preassembled parts, rubber and leather. It is particularly designed to set and adhere rapidly to inactive surfaces.
-
Vibra-Tite 309 General Purpose Gel Cyanoacrylate
A single component high viscosity gel cyanoacrylate adhesive. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.
-
Vibra-Tite 311 Rubber Toughened – Shock & Impact Resistant Cyanoacrylate
A single component high viscosity, rubber-toughened ethyl cyanoacrylate adhesive. Provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments.
-
Vibra-Tite 314 Plastic Bonder Cyanoacrylate
A single component low to medium viscosity cyanoacrylate that is used for a variety of bonding applications. Ideally suited for bonding plastics and rubber to themselves or various combinations. It is recommended for use on small gaps or relatively smooth even surfaces.
-
Vibra-Tite 316 Gap Filling Plastic Bonding Cyanoacrylate
A single component medium to high viscosity cyanoacrylate with extended drying times for filling large gaps with absorbent materials. Versatile and will bond most plastics, rubbers, and metals.
-
Vibra-Tite 320 Wicking Type Plastic Bonding Cyanoacrylate
A single component low viscosity cyanoacrylate adhesive. It is a fast setting wicking grade adhesive ideal for bonding preassembled parts.
-
Vibra-Tite 322 Gap Filling Plastic Bonding Cyanoacrylate
A single component high viscosity cyanoacrylate adhesive with a quicker setting speed than most high viscosity materials. Suitable for all general purpose bonding.
-
Vibra-Tite 330 Metal & Rubber Bonding Cyanoacrylate
A single component, low to medium viscosity ethyl cyanoacrylate adhesive. Slow setting formulation designed for rubber to metal bonding.
-
Vibra-Tite 331 Surface Insensitive – Gap Filling Cyanoacrylate
A single component medium viscosity cyanoacrylate adhesive. Suitable for general-purpose bonding but provides excellent strength and speed on all rubber compounds.
-
Vibra-Tite 333 Surface Insensitive – General Purpose Cyanoacrylate
A single component medium viscosity, fast setting cyanoacrylate adhesive. It is particularly designed to set and adhere rapidly to inactive surfaces.
-
Vibra-Tite 347 Surface Insensitive – General Purpose Cyanoacrylate
A single component, medium to high viscosity cyanoacrylate adhesive. It is particularly designed to set and adhere rapidly to inactive surfaces such as wood, leather and fiberglass mat. Offers viscosity and flow characteristics that are ideal for filling medium gaps.
-
Vibra-Tite 354 Surface Insensitive – Porous Gel Cyanoacrylate
A single component high viscosity gel cyanoacrylate adhesive. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.
-
Vibra-Tite 355 Surface Insensitive – High Viscosity Cyanoacrylate
A surface insensitive, non-runny, instant adhesive that is not a gel. Single component, high viscosity cyanoacrylate adhesive. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.
-
Vibra-Tite 371 Rubber Bonder Cyanoacrylate
A single component, extremely fast setting low viscosity cyanoacrylate adhesive. Specifically formulated for all types of rubber bonding applications.
-
Vibra-Tite 372 Rubber Bonding Cyanoacrylate
A single component, fast setting medium viscosity cyanoacrylate adhesive that works well for bonding rubber.
-
Vibra-Tite 381 Gap Filling – Wire Tacking Cyanoacrylate
A single component high viscosity cyanoacrylate adhesive for electronics. Offers gap-filling and thermal cycling resistance.
-
Vibra-Tite 395 General Purpose Cyanoacrylate
A single component low viscosity cyanoacrylate adhesive. Suitable for general-purpose applications on metals rubbers and plastics.
-
Vibra-Tite 621 Excel CA Accelerator
Used to improve gap-filling abilities of cyanoacrylate adhesives and to speed the cure of high-viscosity cyanoacrylate adhesives.
Eliminates the need to fixture parts. -
Vibra-Tite 642 Cyanoacrylate Remover
- Dissolves and removes the dried super glue (cyanoacrylates) adhesives
- Removes glue from skin, metal, stone, glass, & more
- Perfect for the home, workshop, and garage to dissolve dried glue
- Better than acetone for dissolving glue
- Made in the usa
-
Vibra-Tite 905 Quick Cure 2 Part Epoxy
Vibra-Tite 905 is a fast setting adhesive that cures at temperatures as low as 41°F/5°C. For bonding and repairing small parts.
-
Vibra-Tite 913 Epoxy
Epoxy Vibra-Tite 913 is an extremely strong, medium cure, water-resistant clear adhesive that will self-level after application. This compound is intended to bond parts in a structural environment or potting electronic components and assemblies. Competes with Devcon’s 2 ton epoxy
-
Vibra-Tite 995 Clear RTV Silicone Sealant
A one-part general purpose acetoxy cure silicone sealant that cures in the presence of atmospheric moisture to produce a durable and water proof flexible silicone rubber compound. Resists oil, water, weather, vibration, grease. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl.
