-
Vibra-Tite PS034 Repairman’s Choice – Fast Weld Steel Epoxy Putty Stick
PS034 Steel Epoxy Putty Stick is an epoxy dough-like kit which is activated by hand mixing the material. It cures in 5 minutes and hardens in 20 minutes. It forms a tenacious bond in minutes, even underwater, and may be drilled, filled, tapped, or sanded after 1 hour.
-
Vibra-Tite Viz-Torque® 202
Viz-Torque 202 Tamper Detection Marker is an inspection paste used to visually detect torque movement due to vibratory loosening or tampering of fittings, assemblies, nuts, bolts and studs. This quick-drying tamper proof torque marker identifies whether a part has been moved from its original position. Once dried in place, Viz-Torque 202 Tamper Detection Marker creates a seal for torque movement detection, which allows the dry and brittle material stripe to break, providing proof of fastener tampering or loosening. Viz-Torque 202 has good adhesion to most metals when applied to a clean, dry surface and is available in a selection of highly visible colors.
-
Vibra-Tite 207 UV/Anaerobic Dual Cure Adhesive and Sealant
Vibra-Tite® 207 is a low viscosity UV/Anaerobic dual cure adhesive and sealant for sealing ammo.
-
Vibra-Tite 310 Rubber Toughened – Gap Filling Cyanoacrylate
A single component black, high viscosity, rubbertoughened ethyl cyanoacrylate adhesive. Provides superior shock and thermal resistance when bonding in harsh environments
-
Vibra-Tite 388 Rubber Toughened – Shock/Temp Resistant Cyanoacrylate
A single component black, medium viscosity, rubber toughened ethyl cyanoacrylate adhesive. Provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments.
-
Vibra-Tite 915 Epoxy
VIBRA-TITE 915 is a low-viscosity general purpose potting compound that is designed to form a resilient, long work time potting compound with good surface finish and bond strength to thermoplastics. Competes with Hysol E-60NC
-
Vibra-Tite 921 Plastic Bonding Epoxy
Vibra-Tite 921 is a medium viscosity, industrial grade epoxy adhesive with extended work life. This system forms a good adhesion to thermoplastics with high peel and shear strength. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.
-
Vibra-Tite 932 Encapsulating Epoxy
Vibra-Tite 932 is two-part epoxy encapsulant and adhesive. This system forms a resilient, long work time potting and encapsulant material with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.
-
Vibra-Tite 935 Low Viscosity General Purpose Potting 2 Part Epoxy
Vibra-Tite 935 is a low-viscosity general purpose potting compound that is designed to form a resilient, long work time potting compound with good surface finish and bond strength to thermoplastics.
-
Vibra-Tite 942 Epoxy
Vibra-Tite 942 is a filled, low shrinkage version of Vibra-Tite 941 general purpose encapsulating compound. Designed to form a resilient encapsulant with good surface finish and high bond strength to thermoplastics, Vibra-Tite 942 is recommended when potting assemblies with narrow gaps and tight spaces.
-
Vibra-Tite 993 Heavy Body Black Silicone Gasket Maker
A one-part neutral cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.
-
Vibra-Tite 998 Black RTV Silicone Gasket Maker
A one-part acetoxy cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.
-
Vibra-Tite PB300 MMA – All Purpose – Fast Set
General purpose. Adheres to most substrates. Rapid cure time. No surface preparation. High strength. High modulus. 100% reactive. Excellent resistance to hydrocarbons, acids and bases (3-10 pH), and salt solutions. Use on ABS, Acrylics, Epoxies, FRP, Gelcoats, Polyesters, PVC, Polystyrene, Urethanes, and Vinyl Esters.
-
Vibra-Tite PB305 MMA – All Purpose – Extremely Fast Set
Vibra-Tite PB305 is a fast setting, high performance two part methacrylate adhesive engineered to bond a wide range of materials including metals, plastics, and especially fiberglass. It offers outstanding bond strength, is extremely durable, and exhibits excellent impact and weathering properties. Vibra-Tite PB305 greatly increases the reliability of finished assemblies with exceptional flexibility and its ability to with stand extreme temperature fluctuation and thermal cycling.
-
Vibra-Tite PB310 MMA – All Purpose – High Strength
Vibra-Tite PB310 is a high performance two part methacrylate adhesive engineered to bond a wide range of materials including metals, plastics,and fiberglass. It offers outstanding bond strength, is extremely durable, and exhibits excellent impact and weathering properties. Vibra-Tite PB310 greatly increases the reliability of finished assemblies with exceptional toughness and its ability to with stand extreme temperature fluctuation and thermal cycling.
-
Vibra-Tite PB320 MMA – All Purpose – Medium Set
Vibra-Tite PB320 is a toughened, medium cure speed, high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.
-
Vibra-Tite PB330 MMA – All Purpose – Medium Set
Vibra-Tite PB330 is a high performance two part methacrylate adhesive engineered to bond a wide range of materials including metal and plastics, especially fiberglass. It offers a moderate amount of open time, outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.
-
Vibra-Tite PB405 MMA – All Purpose – Extremely Fast Set
Vibra-Tite PB405 is a high performance two part fast setting methacrylate adhesive, engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, quick setting, and excellent impact and elastic properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental conditions.
-
Vibra-Tite PB420 MMA – All Purpose – Fast Set Time
Vibra-Tite PB420 is a toughened, fast setting, high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.
-
Vibra-Tite PB422 MMA – All Purpose – Slow Set
Vibra-Tite PB422 is a toughened, slow setting, high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.
-
Vibra-Tite PB425 MMA – All Purpose – Long Set
Vibra-Tite PB425 is a toughened, slow setting, high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.
-
Vibra-Tite PB530 MMA – All Purpose – Moderate Set
Vibra-Tite PB530 is a toughened, medium setting, high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.