Isopropanol | Vibra-Tite

  • Vibra-Tite 481 Plastic Thread Sealant

    Vibra-Tite 481 Non-Curing Thread Sealant without PTFE is an off-white paste for general purpose pipe and thread sealing. Vibra-Tite 481 is specifically formulated without PTFE to reduce over-torqueing of plastic fittings and threads. Typical applications include sealing threaded pipes, pipe fittings and flanges to seal against liquids and gases.

  • Vibra-Tite 603 Hand Sanitizer (IPA)

    Isopropyl Alcohol Antiseptic 75%. Topical Solution. Hand Sanitizer. Non-sterile Solution. For consumer use.

  • Vibra-Tite 604 Antiseptic Hand Rub (IPA)

    Isopropyl Alcohol Antiseptic 75%. Topical Solution. Anti-Septic Hand Rub. Non-sterile Solution. For Health Care Personnel.

  • Isopropyl Alcohol 99 percent

    Vibra-Tite 614, IPA 99%, USP Grade Surface Sanitizer

    Isopropyl Alcohol 99%. USP Grade. Sanitizes and disinfects surfaces.

  • Viz-Torque applied to fastener assemblyVibra-Tite Viz-Torque 202 1 oz. Group

    Vibra-Tite Viz-Torque® 202

    Viz-Torque 202 Tamper Detection Marker is an inspection paste used to visually detect torque movement due to vibratory loosening or tampering of fittings, assemblies, nuts, bolts and studs. This quick-drying tamper proof torque marker identifies whether a part has been moved from its original position. Once dried in place, Viz-Torque 202 Tamper Detection Marker creates a seal for torque movement detection, which allows the dry and brittle material stripe to break, providing proof of fastener tampering or loosening. Viz-Torque 202 has good adhesion to most metals when applied to a clean, dry surface and is available in a selection of highly visible colors.

  • vibra-tite 612 primer

    Vibra-Tite 612 Excel Primer T

    Fast acting primer. Significantly speeds up the cure time of anaerobic threadlockers when assembling metal parts that are cold, have large gaps or deep threads. Primers are recommended when assembling metal parts with inactive surfaces such as stainless, galvanized steel and zinc.

  • vibra-tite 624 primer for superglue

    Vibra-Tite 624 Excel Cyanoacrylate Accelerator

    Excel 624 is an ozone friendly accelerator used for normal curing of cyanoacrylates and to prepare the surface for bonding. Excel 624 is an isopropanol based accelerator that will whiten the adhesive's exterior bondline for easy inspection, and will not crack polycarbonate.