Products listed below function through the evaporation of a solvent.

  • Viz-Torque applied to fastener assemblyVibra-Tite Viz-Torque 202 1 oz. Group

    Vibra-Tite Viz-Torque® 202

    Viz-Torque 202 Tamper Detection Marker is an inspection paste used to visually detect torque movement due to vibratory loosening or tampering of fittings, assemblies, nuts, bolts and studs. This quick-drying tamper proof torque marker identifies whether a part has been moved from its original position. Once dried in place, Viz-Torque 202 Tamper Detection Marker creates a seal for torque movement detection, which allows the dry and brittle material stripe to break, providing proof of fastener tampering or loosening. Viz-Torque 202 has good adhesion to most metals when applied to a clean, dry surface and is available in a selection of highly visible colors.

  • Hot

    Vibra-Tite VC-3 Threadmate

    Vibra-Tite VC-3 Threadmate is one of the most versatile threadlockers available on the market. An alternative to traditional liquid lockers which cure to form a hard bond, VC-3 is a proprietary blend of thermoplastic elastomer resins designed to remain flexible and absorb vibration. The combination of inert/non-reactive amorphous resins creates a tough, semi solid layer inside the threads of a mated joint. VC-3 damps the vibrational energy transferred between the threads of a mated fastener, preventing fastener loosening and loss of clamp load. These unique differences make VC-3 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite VC-4

    Vibra-Tite VC-4 exhibits similar performance to Vibra-Tite VC-3 except it contains a base solvent of Ethyl Acetate. VC-4 is one of the most versatile threadlockers available on the market. Unlike traditional liquid lockers which cure to form a hard bond, VC-4 is a blend of resins designed to remain flexible and absorb vibration. This unique difference makes VC-4 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite VC-5

    Vibra-Tite VC-5 exhibits similar performance to Vibra-Tite VC-3 except it contains a base solvent of Methyl Propyl Ketone. VC-5 is one of the most versatile threadlockers available on the market. Unlike traditional liquid lockers which cure to form a hard bond, VC-5 is a blend of resins designed to remain flexible and absorb vibration. This unique difference makes VC-5 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite VC-6

    Vibra-Tite VC-6 exhibits similar performance to Vibra-Tite VC-3 except it contains a base solvent of Dimethyl Carbonate. VC-6 is one of the most versatile threadlockers available on the market. Unlike traditional liquid lockers which cure to form a hard bond, VC-6 is a blend of resins designed to remain flexible and absorb vibration. This unique difference makes VC-6 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite 480 Multi-Purpose FBC Thread Sealant

    Vibra-Tite 480 Multi-Purpose – FBC Compatible Thread Sealant with PTFE is designed to lubricate and seal threaded connections. A non-curing and non-toxic formula, Vibra-Tite 480 contains no lead or harmful metals and can be used in potable water systems.

  • Non-Curing Thread Sealant

    Vibra-Tite 486 Non-Hardening Thread Sealant

    Vibra-Tite 486 Non-Curing Thread Sealant with PTFE is a creamy white paste for general purpose pipe and thread sealing. Typical applications include sealing threaded pipes, pipe fittings and flanges to seal against liquids and gases.

  • Vibra-Tite 600 Excel Structural Activator

    Vibra-Tite Excel 600 Activator is a fast-curing, resin-based material designed for use with Vibra-Tite structural adhesives. The adhesive is applied on one surface and the activator on the other, no mixing required. The activator undergoes a chemical reaction when in contact with the adhesive and polymerizes to form part of the bond. It contains 100% active ingredients.

  • vibra-tite 611 primer

    Vibra-Tite 611 Excel Primer N

    General purpose primer. Significantly speeds up the cure time of anaerobic threadlockers when assembling metal parts that are cold, have large gaps or deep threads. Primers are recommended when assembling metal parts with inactive surfaces such as stainless, galvanized steel and zinc.

  • vibra-tite 612 primer

    Vibra-Tite 612 Excel Primer T

    Fast acting primer. Significantly speeds up the cure time of anaerobic threadlockers when assembling metal parts that are cold, have large gaps or deep threads. Primers are recommended when assembling metal parts with inactive surfaces such as stainless, galvanized steel and zinc.

  • vibra-tite 621 primer for superglue

    Vibra-Tite 621 Excel CA Accelerator

    Used to improve gap-filling abilities of cyanoacrylate adhesives and to speed the cure of high-viscosity cyanoacrylate adhesives.
    Eliminates the need to fixture parts.

  • vibra-tite 623 primer for superglue

    Vibra-Tite 623 Excel General Accelerator

    General purpose accelerator. 623 General Purpose Accelerator is an ozone friendly accelerator used for normal curing of cyanoacrylates and to prepare the surface for bonding. Excel 623 is also designed to provide a fast cure of thick deposits of SuperGlues or for post curing excess adhesive outside of the bond line.

  • vibra-tite 624 primer for superglue

    Vibra-Tite 624 Excel Cyanoacrylate Accelerator

    Excel 624 is an ozone friendly accelerator used for normal curing of cyanoacrylates and to prepare the surface for bonding. Excel 624 is an isopropanol based accelerator that will whiten the adhesive's exterior bondline for easy inspection, and will not crack polycarbonate.

  • Vibra-Tite 625 Excel Polyolefin Primer

    Use Excel 625 Primer for difficult-to-bond plastics. Apply primer to prepare polyolefin or other low-energy surfaces for cyanoacrylate bonding.

  • Vibra-Tite 626 Excel Polyolefin Primer

    Excel 626 General Purpose Accelerator is an acetone based accelerator used for normal curing of cyanoacrylates and to prepare the surface for bonding. Excel 626 is designed to provide a fast cure of thick deposits of SuperGlues or for post curing excess adhesive outside of the bond line.

  • Vibra-Tite 638 Excel Structural Activator

    General structural activator. Initiates the cure of structural acrylic adhesives, such as Vibra-Tite 224.