-20°F | Vibra-Tite

  • Repairman's Choice Epoxy Putty Stick Grey AluminumRepairman's Choice Epoxy Putty Stick Grey Aluminum & black steel

    Vibra-Tite PS014 Repairman’s Choice – Fast Weld Epoxy Putty Stick

    PS014 Epoxy Putty Stick is an epoxy dough like kit which is activated by hand mixing the material. It cures in 5 minutes and hardens like steel in 20 minutes. It forms a tenacious bond in minutes, even underwater, and may be drilled, filled, tapped, or sanded after 1 hour.

  • Repairman's Choice Epoxy PuttyRepairman's Choice Epoxy Putty

    Vibra-Tite PS024 Repairman’s Choice – Fast Weld Epoxy Putty Stick

    PS024 Epoxy Putty Stick is an epoxy dough like kit which is activated by hand mixing the material. It cures in 5 minutes and hardens like steel in 20 minutes. It forms a tenacious bond in minutes, even underwater, and may be drilled, filled, tapped, or sanded after 1 hour.

  • Viz-Torque applied to fastener assemblyVibra-Tite Viz-Torque 202 1 oz. Group

    Vibra-Tite Viz-Torque® 202

    Viz-Torque 202 Tamper Detection Marker is an inspection paste used to visually detect torque movement due to vibratory loosening or tampering of fittings, assemblies, nuts, bolts and studs. This quick-drying tamper proof torque marker identifies whether a part has been moved from its original position. Once dried in place, Viz-Torque 202 Tamper Detection Marker creates a seal for torque movement detection, which allows the dry and brittle material stripe to break, providing proof of fastener tampering or loosening. Viz-Torque 202 has good adhesion to most metals when applied to a clean, dry surface and is available in a selection of highly visible colors.

  • vibra-tite polyurethane

    Vibra-Tite 801 Urethane

    Vibra-Tite 801 is a 1-component liquid adhesive based on polyurethane. It is a moisture-curing, long open time structural assembly system. Unlike contact adhesives, which require the coating of both substrate surfaces, Vibra-Tite 801 requires only a single side. There is no need for additional handling and expensive drying ovens to flash off solvents before engaging the bond.

  • vibra-tite polyurethane

    Vibra-Tite 801FC Fast Curing Urethane

    Versatile urethane for bonding wood, metal glass, stone, brick, fiberglass, carbon, foam and more. 100% waterproof. Temperature resistant. Sandable, paintable, stainable. Low foam.

  • vibra-tite polyurethane

    Vibra-Tite 801SS Stainless Steel Urethane

    Versatile urethane for bonding wood, metal glass, stone, brick, fiberglass, carbon, foam and more. 100% waterproof. Temperature resistant. Sandable, paintable, stainable. Low foam.

  • vibra-tite polyurethane

    Vibra-Tite 802 Polyurethane

    Vibra-Tite 802 is a 2-component lamination adhesive system based on polyurethane. Vibra-Tite 803 HARDENER is a polyol blend which can be colored with pigment, and Vibra-Tite 802 RESIN is a formulated isocyante with exceptional bonding and sealing properties to provide exceptional adhesion to a wide variety of engineering plastics, metals or other substrates. This system can be used with plural component extrusion equipment, or standard 1:1 meter mix (volumetric) dispensing machines that use static mixers. Its mixed viscosity of ~3500 cps at 75°F allows Vibra-Tite 802 to be spray applied using heavy particle size atomization process.

  • Vibra-Tite 825 Structural

    Vibra-Tite 825 is an economical, multipurpose structural adhesive/sealant designed for difficult bonding and sealing applications. It is a moisture curing sealant developed for industrial uses requiring elasticity, high immediate green strength and excellent adhesion. Non-sagging but easy to gun / apply in field installations.

  • Vibra-tite 90550 epoxy

    Vibra-Tite 905 Quick Cure 2 Part Epoxy

    Vibra-Tite 905 is a fast setting adhesive that cures at temperatures as low as 41°F/5°C. For bonding and repairing small parts.

  • Vibra-Tite 910 5-Minute Two Part Epoxy

    A 2-part system forms a strong bond when cured. 4-6 minutes of positioning time and can be handled in 1 hour. Formulated as a gel, which makes it idea for both vertical and horizontal surfaces. Green color is the combination of blue resin and yellow hardener. Once correctly mixed they will combine to a green color.

  • Vibra-Tite 989 Multi-Purpose Polyurethane

    Vibra-Tite 989 Multi-Purpose Polyurethane

    Versatile urethane for bonding wood, metal glass, stone, brick, fiberglass, carbon, foam and more. 100% waterproof. Temperature resistant. Sandable, paintable, stainable. Low foam.