Vibra-Tite 224 High Impact Structural Adhesive
Structural acrylic adhesive that is designed to bond a wide range of substrates such as metal, wood and some plastics. Use with structural activator, such as Vibra-Tite 638.
Vibra-Tite 225 No-Mix Structural Adhesive
An activated Acrylic adhesive designed for fast fixturing on metal and ceramic materials. Applications include bonding metal or ceramic close fitting rigid parts which are exposed to thermal cycling, like motor assemblies.
Vibra-Tite 250 Doming Plastics Light Cure Adhesive
Vibra-Tite 250 is a single component, medium viscosity UV coating and structural adhesive suitable for bonding glass to glass or glass to plastic. It is suitable for use as a doming resin on glass and some plastics and composites. This product cures when exposed to ultraviolet radiation. When cured, it is highly resistant to vibration and impact forces.
Vibra-Tite 911 Epoxy
Epoxy VIBRA-TITE 911 is a fast setting adhesive that cures at temperatures as low as 41°F/5°C. For bonding and repairing small parts. Competes with Fastweld 10
Vibra-Tite 915 Epoxy
VIBRA-TITE 915 is a low-viscosity general purpose potting compound that is designed to form a resilient, long work time potting compound with good surface finish and bond strength to thermoplastics. Competes with Hysol E-60NC
Vibra-Tite 921 Plastic Bonding Epoxy
Vibra-Tite 921 is a medium viscosity, industrial grade epoxy adhesive with extended work life. This system forms a good adhesion to thermoplastics with high peel and shear strength. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.
Vibra-Tite 924 Epoxy
Vibra-Tite 924 is a general purpose, medium viscosity, two-component epoxy adhesive system used for applications which require strong, durable, chemically and environmentally resistant bonds, high viscosity, with an extended work life. This system forms a resilient, long work time adhesive with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance. Competes with Lord 305
Vibra-Tite 932 Encapsulating Epoxy
Vibra-Tite 932 is two-part epoxy encapsulant and adhesive. This system forms a resilient, long work time potting and encapsulant material with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.
Vibra-Tite 933 Ignition Coil Impregnation and Encapsulation Epoxy
Vibra-Tite 933 is a long working life, heat curing, and two component formulation. It was designed especially for potting high voltage coils. The combination of low viscosity, excellent high temperature electrical properties and good thermal shock resistance makes this epoxy ideal for this application.
Vibra-Tite 934 Induction Cure Epoxy
Vibra-Tite 934 is a single-part induction cured epoxy adhesive with excellent adhesion to metal oily surfaces as well as composite materials. Can be used to enhance joint stiffness and joint durability. The high bond strength of this adhesive allows it to replace mechanical fasteners, soldering, brazing, or welding. Requires heat in the range of 120°C to 200°C. Vibra-Tite 934 is non-sagging allowing use with large gaps and on vertical surfaces.
Vibra-Tite 951 Pourable Aluminum Epoxy
Vibra-Tite 951 is a two component, aluminum filled epoxy for making molds, patterns, and holding fixtures. When the two components are properly mixed, the epoxy cures at room temperature to a silvery grey material that can be machined, drilled, sanded or tapped. Competes with Devcon Aluminum Liquid
- Thread Sealants
- Retaining Compounds
- Liquid Gasket Makers
- Adhesives / Bonding
- Adhesives / Structurals
- Anti-Seize Lubricants
- Excel Surface Preparation
- Viz-Torque (Tamper Detection)
- Specialty Products
- Equipment & Accessories
- Certs / Compliance
- Contact Us