1.1 | Vibra-Tite
-
Vibra-Tite 122 Oil Tolerant Threadlocker
A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 1/4'' to 3/4'' in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.
-


Hot
Vibra-Tite 125 Medium Strength Gel Threadlocker
A medium strength anaerobic gel threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance. No-drip gel formula.
-
-
Vibra-Tite 132 High Strength Primerless Threadlocker
A high strength and high temperature threadlocker designed for permanently locking or sealing nuts and bolts up 1” diameter. Primerless, oil tolerant formula will cure even on passive materials such as stainless steel.
-

Vibra-Tite 135 High Strength Gel Threadlocker
A high strength anaerobic gel threadlocker designed to permanently lock fasteners up to 1” in diameter. Exhibits good temperature and solvent resistance. No-drip gel formulation makes it easy to apply.
-
-
Vibra-Tite 140 High Strength Threadlocker
A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks and seals fasteners from up to 1'' in diameter.
-
-
-
Vibra-Tite 225 No-Mix Structural Adhesive
An activated Acrylic adhesive designed for fast fixturing on metal and ceramic materials. Applications include bonding metal or ceramic close fitting rigid parts which are exposed to thermal cycling, like motor assemblies.
-
-
-
Vibra-Tite 325 Plastic Threadlocker
Vibra-Tite 325 is a cyanoacrylate threadlocker designed for small metal, and plastic fasteners. Because of its blue color it can be used as head marking tool for tamper proofing.
-
Vibra-Tite 530 General Purpose Retaining Compound
The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Can be used where lubricity is needed to press fit parts or to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.
-
-
Vibra-Tite 541 High Strength – Slip Fit Retaining Compound
A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.
-
Vibra-Tite 548 Rapid Curing Retaining Compound
A medium viscosity, quick curing, high strength anaerobic retaining compound designed for tight-clearance, and slip-fit metal applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.
-
Vibra-Tite 550 Core Plug Sealant Retaining Compound
A high strength anaerobic retaining compound designed for freeze, core, and cup plug applications. Used to seal core plugs in upper and lower manifolds and engine blocks. Typical applications include core plugs and cup plugs installed into engine blocks.
-
Vibra-Tite 560 High Strength – High Temperature Retaining Compound
A high strength, high temperature, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.
-
Vibra-Tite 989 Multi-Purpose Polyurethane
Versatile urethane for bonding wood, metal glass, stone, brick, fiberglass, carbon, foam and more. 100% waterproof. Temperature resistant. Sandable, paintable, stainable. Low foam.
-
Vibra-Tite PB300 MMA – All Purpose – Fast Set
General purpose. Adheres to most substrates. Rapid cure time. No surface preparation. High strength. High modulus. 100% reactive. Excellent resistance to hydrocarbons, acids and bases (3-10 pH), and salt solutions. Use on ABS, Acrylics, Epoxies, FRP, Gelcoats, Polyesters, PVC, Polystyrene, Urethanes, and Vinyl Esters.
-
Vibra-Tite PB320 MMA – All Purpose – Medium Set
Vibra-Tite PB320 is a toughened, medium cure speed, high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.
Hand sanitizers now available. Consumer IPA and Ethanol. Dismiss