400 mL | Product Available Sizes | Vibra-Tite

Home
>
Product

Vibra-Tite M400EP01 Mix Nozzle

Mix Nozzle for 400 mL, 2:1 or 1:1 dual cartridges. Has 24 elements, a 5.8” length and 8.7 mm inner diameter.
Vibra-Tite M400PB01 Mix Nozzle

Mix Nozzle for 400 mL, 2:1 or 1:1 dual cartridges. Has 18 elements, a 7.3'' length and 8 mm inner diameter.
Vibra-Tite 910G 5-Minute Two Part Epoxy

Vibra-Tite 910G Epoxy is a 2-part system that forms a strong bond when cured. While flowing through the mix nozzle (sold separately), the blue resin and yellow hardener combine and dispense as a solid green color, providing visual proof of a thoroughly mixed epoxy. Once applied, this material allows 4-6 minutes of positioning time and can be handled in 1 hour. This product is formulated as a gel, which makes it ideal for both vertical and horizontal surfaces.

Select options
Vibra-Tite PB300 MMA – All Purpose – Fast Set

General purpose. Adheres to most substrates. Rapid cure time. No surface preparation. High strength. High modulus. 100% reactive. Excellent resistance to hydrocarbons, acids and bases (3-10 pH), and salt solutions. Use on ABS, Acrylics, Epoxies, FRP, Gelcoats, Polyesters, PVC, Polystyrene, Urethanes, and Vinyl Esters.

Select options
Vibra-Tite PB310 MMA – All Purpose – High Strength

Vibra-Tite PB310 is a high performance two part methacrylate adhesive engineered to bond a wide range of materials including metals, plastics,and fiberglass. It offers outstanding bond strength, is extremely durable, and exhibits excellent impact and weathering properties. Vibra-Tite PB310 greatly increases the reliability of finished assemblies with exceptional toughness and its ability to with stand extreme temperature fluctuation and thermal cycling.

Select options
Vibra-Tite 932 Encapsulating Epoxy

Vibra-Tite 932 is two-part epoxy encapsulant and adhesive. This system forms a resilient, long work time potting and encapsulant material with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

Read more
Vibra-Tite PB305 MMA – All Purpose – Extremely Fast Set

Vibra-Tite PB305 is a fast setting, high performance two part methacrylate adhesive engineered to bond a wide range of materials including metals, plastics, and especially fiberglass. It offers outstanding bond strength, is extremely durable, and exhibits excellent impact and weathering properties. Vibra-Tite PB305 greatly increases the reliability of finished assemblies with exceptional flexibility and its ability to with stand extreme temperature fluctuation and thermal cycling.

Select options
Vibra-Tite 924 Epoxy

Vibra-Tite 924 is a general purpose, medium viscosity, two-component epoxy adhesive system used for applications which require strong, durable, chemically and environmentally resistant bonds, high viscosity, with an extended work life. This system forms a resilient, long work time adhesive with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance. Competes with Lord 305

Select options
Vibra-Tite 905 Quick Cure 2 Part Epoxy

Vibra-Tite 905 is a fast setting adhesive that cures at temperatures as low as 41°F/5°C. For bonding and repairing small parts.

Select options
Vibra-Tite 911 Epoxy

Epoxy VIBRA-TITE 911 is a fast setting adhesive that cures at temperatures as low as 41°F/5°C. For bonding and repairing small parts. Competes with Fastweld 10

Select options
Vibra-Tite 921 Plastic Bonding Epoxy

Vibra-Tite 921 is a medium viscosity, industrial grade epoxy adhesive with extended work life. This system forms a good adhesion to thermoplastics with high peel and shear strength. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

Select options
Vibra-Tite 923 Aluminum Bonding Epoxy

Vibra-Tite 923 is a toughened, medium viscosity, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature to form a tough, off-white, bond line that provides high adhesive strength.

Select options
Vibra-Tite 920 High Peel / High Shear 2 Part Epoxy

Vibra-Tite 920 is a medium viscosity, industrial grade epoxy adhesive with extended work life. This system forms a good adhesion to thermoplastics with high peel and shear strength. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

Select options
Vibra-Tite 990 Flexible Toughened 2 Part Epoxy

Vibra- Tite 990 is a high viscosity, industrial grade epoxy adhesive with extended work life. This system forms a resilient, long work time adhesive with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

Select options
Vibra-Tite 927 Medium Viscosity / High Strength 2 Part Epoxy

A toughened, medium viscosity, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature to form a tough, off-white, bond line that provides high adhesive strength.

Select options
Vibra-Tite 915 Epoxy

VIBRA-TITE 915 is a low-viscosity general purpose potting compound that is designed to form a resilient, long work time potting compound with good surface finish and bond strength to thermoplastics. Competes with Hysol E-60NC

Select options
Vibra-Tite 916 Epoxy

VIBRA-TITE 916 is a toughened, medium viscosity, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature to form a tough, off-white, bond line that provides high adhesive strength. Competes with Hysol E-60HP

Select options
Vibra-Tite PB330 MMA – All Purpose – Medium Set

Vibra-Tite PB330 is a high performance two part methacrylate adhesive engineered to bond a wide range of materials including metal and plastics, especially fiberglass. It offers a moderate amount of open time, outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.

Select options
Vibra-Tite PB530 MMA – All Purpose – Moderate Set

Vibra-Tite PB530 is a toughened, medium setting, high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.

Select options
Vibra-Tite PB560 MMA – All Purpose – Long Set Time

Vibra-Tite PB560 is a toughened, slow set, high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.

Select options
Vibra-Tite PB590 MMA – All Purpose – Longest Set Time

Vibra-Tite PB590 is a toughened, very slow setting, high performance two part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, extreme durability, and excellent impact and weathering properties. Greatly increases the reliability of finished assemblies with its ability to withstand extreme temperature fluctuation, thermal cycling, and chemical / environmental resistance.

Select options
Vibra-Tite PB500 MMA – Low Surface Energy Bonder

Vibra-Tite PB500 is a 2-part methacrylate based adhesive that is specially formulated to bond low surface energy materials such as polypropylene, polyethylene and PTFE without additional surface preparation. The PB500 offers increased working time while also building ultimate strength faster than other adhesives in its class. The PB500 material offers high impact resistance and is capable of withstanding extreme temperature fluctuations.

Select options
Vibra-Tite D400RVA Dispenser

200, 400 and 490 mL manual, metal dispenser for 1:1, 2:1, and 10:1 dual cartridges
Vibra-Tite D400RVP Dispenser

200 mL and 400 mL, pneumatic powered, metal dispenser for 1:1, 2:1, 4:1, and 10:1 dual cartridges
Vibra-Tite D400RVPHD Dispenser

200 mL and 400 mL, pneumatic powered, metal dispenser for 1:1, 2:1, 4:1, and 10:1 dual cartridges

‹ › ×