250 mL | Vibra-Tite

  • vibra-tite 111 threadlocker

    Vibra-Tite 111 Low Strength Threadlocker

    A low strength anaerobic threadlocker designed for locking threaded fasteners smaller than 1/4” in diameter, which require disassembly with standard hand tools. Also works on set screws, and screws that have a long engagement length.

  • 12150 Threadlocker Applied

    Vibra-Tite 121 Medium Strength Threadlocker

    A medium strength anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance.

  • Vibra-Tite 122 Oil Tolerant Threadlocker

    A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 1/4'' to 3/4'' in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.

  • Hot

    Vibra-Tite 125 Medium Strength Gel Threadlocker

    A medium strength anaerobic gel threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance. No-drip gel formula.

  • 13150 Threadlocker Applied

    Vibra-Tite 131 High Strength Threadlocker

    A high strength anaerobic threadlocker designed to permanently lock fasteners up to 1'' in diameter. Exhibits good temperature and solvent resistance.

  • Vibra-Tite 135 High Strength Gel Threadlocker

    A high strength anaerobic gel threadlocker designed to permanently lock fasteners up to 1” in diameter. Exhibits good temperature and solvent resistance. No-drip gel formulation makes it easy to apply.

  • Vibra-Tite 137 High Temp/High Strength Threadlocker

    A high strength and high temperature anaerobic threadlocker designed to permanently lock fasteners up to 1 1/2'' in diameter. Joins threaded parts exposed to operating temperatures up to 450°F

  • Vibra-Tite 140 High Strength Threadlocker

    A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks and seals fasteners from up to 1'' in diameter.

  • vibra-tite 141 threadlocker

    Vibra-Tite 141 High Strength Threadlocker

    A green general purpose threadlocker for permanent locking of threaded assemblies. 141 works on fasteners up to 1″ in diameter and seals against leakage and corrosion. It resists attack from most fuels, lubricants and industrial gases.

  • Vibra-Tite 146 Large Diameter/High Strength Threadlocker

    A high strength, large diameter anaerobic threadlocker designed to permanently lock fasteners. Resists attack from lubricants and most industrial liquids and gases.

  • Vibra-Tite 150 Medium Strength – Wicking Grade Threadlocker

    A fast cure, low viscosity wicking anaerobic threadlocker designed to seek voids in assembled components and cure anaerobically. Can be used as a post assembly application to prevent the loosening of metal threaded fasteners.

  • Hot

    Vibra-Tite VC-3 Threadmate

    Vibra-Tite VC-3 Threadmate is one of the most versatile threadlockers available on the market. An alternative to traditional liquid lockers which cure to form a hard bond, VC-3 is a proprietary blend of thermoplastic elastomer resins designed to remain flexible and absorb vibration. The combination of inert/non-reactive amorphous resins creates a tough, semi solid layer inside the threads of a mated joint. VC-3 damps the vibrational energy transferred between the threads of a mated fastener, preventing fastener loosening and loss of clamp load. These unique differences make VC-3 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite 215 Potting Light Cure Adhesive

    Vibra-Tite 215 is a uv curing, modified methacrylate ester adhesive with secondary heat cure. Vibra-Tite 215 is designed for UV potting and bonding glass to plastic substrates.

  • Vibra-Tite VC-4

    Vibra-Tite VC-4 exhibits similar performance to Vibra-Tite VC-3 except it contains a base solvent of Ethyl Acetate. VC-4 is one of the most versatile threadlockers available on the market. Unlike traditional liquid lockers which cure to form a hard bond, VC-4 is a blend of resins designed to remain flexible and absorb vibration. This unique difference makes VC-4 coated fasteners truly adjustable, removable, and reusable.

  • Vibra-Tite 220 Glass Bonding Light Cure Adhesive

    Vibra-Tite 220 is a uv curing, modified methacrylate ester adhesive. It is designed for bonding glass to glass and glass to metal.

  • Vibra-Tite 240 No-Mix Structural Adhesive

    An activated acrylic adhesive designed for fast fixturing on metal and magnet materials and a no mix system. Used in applications that require very fast assembly.

  • 42050 Thread Sealant Applied

    Vibra-Tite 420 Controlled Strength Thread Sealant

    An anaerobic thread sealing and thread locking compound with PTFE for pipe fittings. It is designed for sealing threaded fasteners that require disassembly with standard hand tools. It exhibits good temperature and solvent resistant.

  • Vibra-Tite 427 Medium Strength – Stainless Steel Thread Sealant

    Prevents leakage and loosening from shock and vibration. Particularly suitable for stainless steel.

  • Vibra-Tite 440 Pneumatic / Hydraulic Sealant Thread Sealant

    A fast curing high strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressures and vibrational loosening.

  • Vibra-Tite 442 Gel Thread Sealant

    Vibra-Tite 442 Hydraulic Fast Cure Gel Sealant

    A fast curing gel thread selant which withstands temperatures up to 300°F (149°C).

  • Vibra-Tite 444 Hydraulic Sealant – High Pressure Thread Sealant

    A medium strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressure and vibrational loosening.

  • Vibra-Tite 446 Refrigerant Sealant – High Pressure Thread Sealant

    Optimum resistance to solvents and refrigerants. Excellent chemical resistance on threaded connections handling ammonia, fluorocarbons and halides. Provides an instant seal between threaded fittings. Uncured sealant is miscible with hydraulic fluid and will not clog filter and other components in hydraulic systems.

  • 46050 Thread Sealant Applied

    Vibra-Tite 460 High Temp/Stainless Steel Thread Sealant

    Sets fast to give an instant low pressure seal of 100 psi and a high pressure seal when fully cured. This high strength product provides 100% sealing capability and does not shrink after curing, unlike more traditional solvent based pipe dopes. Contains PTFE.

  • Vibra-Tite 530 General Purpose Retaining Compound

    The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Can be used where lubricity is needed to press fit parts or to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

  • Vibra-Tite 535 General Purpose – Gel Retaining Compound

    A controlled, high strength anaerobic gel retaining compound with good temperature and solvent resistance. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

  • Vibra-Tite 538 High Strength Retaining Compound

    A high strength, room curing anaerobic retaining compound that resists axial and radial loading.

  • vibra-tite 541 retaining compound

    Vibra-Tite 541 High Strength – Slip Fit Retaining Compound

    A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

  • Vibra-Tite 542 High Strength – Large Gap Retaining Compound

    A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

  • Vibra-Tite 546 Impact Resistant Retaining Compound

    A quick fixturing high strength flexible, anaerobic retaining compound designed to bond metal cylindrical assemblies. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 548 Rapid Curing Retaining Compound

    A medium viscosity, quick curing, high strength anaerobic retaining compound designed for tight-clearance, and slip-fit metal applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 550 Core Plug Sealant Retaining Compound

    A high strength anaerobic retaining compound designed for freeze, core, and cup plug applications. Used to seal core plugs in upper and lower manifolds and engine blocks. Typical applications include core plugs and cup plugs installed into engine blocks.

  • Vibra-Tite 560 High Strength – High Temperature Retaining Compound

    A high strength, high temperature, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 567 High Temperature – Large Gap Retaining Compound

    A high temperature, high strength, large gap filling anaerobic retaining compound designed for metal cylindrical assembly applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

  • Vibra-Tite 600 Excel Structural Activator

    Vibra-Tite Excel 600 Activator is a fast curing, resin based designed for use with Vibra-Tite structural adhesives. The adhesive is applied on one surface and the activator on the other, no mixing required. The activator undergoes a chemical reaction when in contact with the adhesive and polymerizes to form part of the bond. It contains 100% active ingredients.

  • Vibra-Tite 710 High Temperature Rigid Flange Sealant Gasket Maker

    Vibra-Tite 710 Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. Provides an instant low pressure seal. This product can be used with or without pre-cut, pre-formed gaskets.

  • vibra-tite 724 gasket maker

    Vibra-Tite 724 Fast Flange Sealant Gasket Maker

    Single component, medium strength, thixotropic, anaerobic sealant. Provides a fast low pressure seal between rigid metal faces and flanges and is suitable as a replacement for a variety of pre-formed or pre-cut gastkets. The thixotropic behavior of this material minimizes migration of material following application.

  • Vibra-Tite 730 Flexible Solvent Resistant Gasket Maker

    High viscosity, single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. Provides an instant low pressure seal. Seals joints between rigid metal faces and flanges such as valve covers and gearbox casings.

  • Vibra-Tite 732 Flexible Gasket Maker

    A tough flexible formed-in-place gasket. Provides an instant low pressure seal. For fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, chainsaws, lawn mowers etc.