-
Vibra-Tite 111 Low Strength Threadlocker
A low strength anaerobic threadlocker designed for locking threaded fasteners smaller than 1/4” in diameter, which require disassembly with standard hand tools. Also works on set screws, and screws that have a long engagement length.
-
Vibra-Tite 121 Medium Strength Threadlocker
A medium strength anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance.
-
Vibra-Tite 122 Oil Tolerant Threadlocker
A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.
-
Vibra-Tite 123 Medium Strength High Temp Threadlocker
Typical uses include locking nuts or bolts ranging from 1/4” to 3/4” (6-20 mm) in diameter at continuous temperatures up to 450°F.
-
Vibra-Tite 131 High Strength Threadlocker
A high strength anaerobic threadlocker designed to permanently lock fasteners up to 1'' in diameter. Exhibits good temperature and solvent resistance.
-
Vibra-Tite 132 High Strength Primerless Threadlocker
A high strength and high temperature threadlocker designed for permanently locking or sealing nuts and bolts up 1” diameter. Primerless, oil tolerant formula will cure even on passive materials such as stainless steel.
-
Vibra-Tite 137 High Temp/High Strength Threadlocker
A high strength and high temperature anaerobic threadlocker designed to permanently lock fasteners up to 1 1/2'' in diameter. Joins threaded parts exposed to operating temperatures up to 450°F
-
Vibra-Tite 140 High Strength Threadlocker
A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks and seals fasteners from up to 1'' in diameter.
-
Vibra-Tite 141 High Strength Threadlocker
A green general purpose threadlocker for permanent locking of threaded assemblies. 141 works on fasteners up to 1″ in diameter and seals against leakage and corrosion. It resists attack from most fuels, lubricants and industrial gases.
-
Vibra-Tite 146 Large Diameter/High Strength Threadlocker
A high strength, large diameter anaerobic threadlocker designed to permanently lock fasteners. Resists attack from lubricants and most industrial liquids and gases.
-
Vibra-Tite 150 Medium Strength – Wicking Grade Threadlocker
A fast cure, low viscosity wicking anaerobic threadlocker designed to seek voids in assembled components and cure anaerobically. Can be used as a post assembly application to prevent the loosening of metal threaded fasteners.
-
Vibra-Tite 440 Pneumatic / Hydraulic Sealant Thread Sealant
A fast curing high strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressures and vibrational loosening.
-
Vibra-Tite 444 Hydraulic Sealant – High Pressure Thread Sealant
A medium strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressure and vibrational loosening.
-
Vibra-Tite 446 Refrigerant Sealant – High Pressure Thread Sealant
Optimum resistance to solvents and refrigerants. Excellent chemical resistance on threaded connections handling ammonia, fluorocarbons and halides. Provides an instant seal between threaded fittings. Uncured sealant is miscible with hydraulic fluid and will not clog filter and other components in hydraulic systems.
-
Vibra-Tite 530 General Purpose Retaining Compound
The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Can be used where lubricity is needed to press fit parts or to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.
-
Vibra-Tite 541 High Strength – Slip Fit Retaining Compound
A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.
-
Vibra-Tite 542 High Strength – Large Gap Retaining Compound
A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.
-
Vibra-Tite 560 High Strength – High Temperature Retaining Compound
A high strength, high temperature, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.
-
Vibra-Tite 567 High Temperature – Large Gap Retaining Compound
A high temperature, high strength, large gap filling anaerobic retaining compound designed for metal cylindrical assembly applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.
-
Vibra-Tite 626 Excel Polyolefin Primer
Excel 626 General Purpose Accelerator is an acetone based accelerator used for normal curing of cyanoacrylates and to prepare the surface for bonding. Excel 626 is designed to provide a fast cure of thick deposits of SuperGlues or for post curing excess adhesive outside of the bond line.
-
Vibra-Tite 626 Excel Polyolefin Primer
Excel 626 General Purpose Accelerator is an acetone based accelerator used for normal curing of cyanoacrylates and to prepare the surface for bonding. Excel 626 is designed to provide a fast cure of thick deposits of SuperGlues or for post curing excess adhesive outside of the bond line.