1 L | Product Available Sizes | Vibra-Tite

Home
>
Product

Vibra-Tite 111 Low Strength Threadlocker

A low strength anaerobic threadlocker designed for locking threaded fasteners smaller than 1/4” in diameter, which require disassembly with standard hand tools. Also works on set screws, and screws that have a long engagement length.

Select options
Vibra-Tite 121 Medium Strength Threadlocker

A medium strength anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance.

Select options
Vibra-Tite 122 Oil Tolerant Threadlocker

A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.

Select options
Vibra-Tite 131 High Strength Threadlocker

A high strength anaerobic threadlocker designed to permanently lock fasteners up to 1'' in diameter. Exhibits good temperature and solvent resistance.

Select options
Vibra-Tite 137 High Temp/High Strength Threadlocker

A high strength and high temperature anaerobic threadlocker designed to permanently lock fasteners up to 1 1/2'' in diameter. Joins threaded parts exposed to operating temperatures up to 450°F

Select options
Vibra-Tite 140 High Strength Threadlocker

A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks and seals fasteners from up to 1'' in diameter.

Select options
Vibra-Tite 146 Large Diameter/High Strength Threadlocker

A high strength, large diameter anaerobic threadlocker designed to permanently lock fasteners. Resists attack from lubricants and most industrial liquids and gases.

Select options
Vibra-Tite 150 Medium Strength – Wicking Grade Threadlocker

A fast cure, low viscosity wicking anaerobic threadlocker designed to seek voids in assembled components and cure anaerobically. Can be used as a post assembly application to prevent the loosening of metal threaded fasteners.

Select options
Vibra-Tite 208 Impact Resistant Light Cure Adhesive

Dual cure impact resistant gel UV adhesive with excellent adhesion to most substrates.

Select options
Vibra-Tite 207 UV/Anaerobic Dual Cure Adhesive and Sealant

Vibra-Tite® 207 is a low viscosity UV/Anaerobic dual cure adhesive and sealant for sealing ammo.

Select options
Vibra-Tite 209 Low Intensity UV Light Cure Adhesive

Medium-High viscosity UV (light cure) adhesive with excellent adhesion to most substrate types.

Select options
Vibra-Tite 211 Glass Bonder Light Cure Adhesive

Low viscosity glass bonder. Used to bond, seal or coat metal and glass components in industrial applications. Typical used include, but are not limited to, bonding electrical devices, appliance parts, and decorative components.

Select options
Vibra-Tite 215 Potting Light Cure Adhesive

Vibra-Tite 215 is a uv curing, modified methacrylate ester adhesive with secondary heat cure. Vibra-Tite 215 is designed for UV potting and bonding glass to plastic substrates.

Select options
Vibra-Tite 220 Glass Bonding Light Cure Adhesive

Vibra-Tite 220 is a uv curing, modified methacrylate ester adhesive. It is designed for bonding glass to glass and glass to metal.

Select options
Vibra-Tite 225 No-Mix Structural Adhesive

An activated Acrylic adhesive designed for fast fixturing on metal and ceramic materials. Applications include bonding metal or ceramic close fitting rigid parts which are exposed to thermal cycling, like motor assemblies.

Select options
Vibra-Tite 226 No-Mix Structural Adhesive

Fast fixturing applications.

Select options
Vibra-Tite 229 Glass Bonding Light Cure Adhesive

Medium-High viscosity UV glass bonder for glass and some metal; cures optically clear.

Select options
Vibra-Tite 230 Impact Resistant Light Cure Adhesive

Impact resistant multi-cure UV adhesive for glass and steel bonding.

Select options
Vibra-Tite 233 No-Mix Toughened Structural Adhesive

Rough or porous surfaces.

Select options
Vibra-Tite 240 No-Mix Structural Adhesive

An activated acrylic adhesive designed for fast fixturing on metal and magnet materials and a no mix system. Used in applications that require very fast assembly.

Select options
Vibra-Tite 250 Doming Plastics Light Cure Adhesive

Vibra-Tite 250 is a single component, medium viscosity UV coating and structural adhesive suitable for bonding glass to glass or glass to plastic. It is suitable for use as a doming resin on glass and some plastics and composites. This product cures when exposed to ultraviolet radiation. When cured, it is highly resistant to vibration and impact forces.

Select options
Vibra-Tite 265 Tacking Light Cure Adhesive

A medium viscosity light tacking UV adhesive for glass, steel and plastic.

Select options
Vibra-Tite 291 Acrylic UV – Visible w/Fluorescence Light Cure

Low viscosity UV needle bonder for fiberglass, PS (polystyrene), ABS (Acrylonitrile Butyl Styrene), and acrylic.

Select options
Vibra-Tite 294 Plastic Bonding Light Cure Adhesive

Medium viscosity UV (light cure) adhesive with excellent adhesion to most substrate types.

Select options
Vibra-Tite 297 Acrylic UV – Visible w/Fluorescence Light Cure

Low viscosity UV (light cure) needle bonder that bonds well with PVC, Acrylic, and glass.

Select options
Vibra-Tite 420 Controlled Strength Thread Sealant

An anaerobic thread sealing and thread locking compound with PTFE for pipe fittings. It is designed for sealing threaded fasteners that require disassembly with standard hand tools. It exhibits good temperature and solvent resistant.

Select options
Vibra-Tite 440 Pneumatic / Hydraulic Sealant Thread Sealant

A fast curing high strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressures and vibrational loosening.

Select options
Vibra-Tite 444 Hydraulic Sealant – High Pressure Thread Sealant

A medium strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressure and vibrational loosening.

Select options
Vibra-Tite 446 Refrigerant Sealant – High Pressure Thread Sealant

Optimum resistance to solvents and refrigerants. Excellent chemical resistance on threaded connections handling ammonia, fluorocarbons and halides. Provides an instant seal between threaded fittings. Uncured sealant is miscible with hydraulic fluid and will not clog filter and other components in hydraulic systems.

Select options
Vibra-Tite 460 High Temp/Stainless Steel Thread Sealant

Sets fast to give an instant low pressure seal of 100 psi and a high pressure seal when fully cured. This high strength product provides 100% sealing capability and does not shrink after curing, unlike more traditional solvent based pipe dopes. Contains PTFE.

Select options
Vibra-Tite 530 General Purpose Retaining Compound

The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Can be used where lubricity is needed to press fit parts or to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

Select options
Vibra-Tite 538 High Strength Retaining Compound

A high strength, room curing anaerobic retaining compound that resists axial and radial loading.

Select options
Vibra-Tite 541 High Strength – Slip Fit Retaining Compound

A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

Select options
Vibra-Tite 542 High Strength – Large Gap Retaining Compound

A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

Select options
Vibra-Tite 546 Impact Resistant Retaining Compound

A quick fixturing high strength flexible, anaerobic retaining compound designed to bond metal cylindrical assemblies. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 548 Rapid Curing Retaining Compound

A medium viscosity, quick curing, high strength anaerobic retaining compound designed for tight-clearance, and slip-fit metal applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 550 Core Plug Sealant Retaining Compound

A high strength anaerobic retaining compound designed for freeze, core, and cup plug applications. Used to seal core plugs in upper and lower manifolds and engine blocks. Typical applications include core plugs and cup plugs installed into engine blocks.

Select options
Vibra-Tite 560 High Strength – High Temperature Retaining Compound

A high strength, high temperature, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 567 High Temperature – Large Gap Retaining Compound

A high temperature, high strength, large gap filling anaerobic retaining compound designed for metal cylindrical assembly applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 600 Excel Structural Activator

Vibra-Tite Excel 600 Activator is a fast-curing, resin-based material designed for use with Vibra-Tite structural adhesives. The adhesive is applied on one surface and the activator on the other, no mixing required. The activator undergoes a chemical reaction when in contact with the adhesive and polymerizes to form part of the bond. It contains 100% active ingredients.

Select options
Vibra-Tite 989 Multi-Purpose Polyurethane

Versatile urethane for bonding wood, metal glass, stone, brick, fiberglass, carbon, foam and more. 100% waterproof. Temperature resistant. Sandable, paintable, stainable. Low foam.

Select options

‹ › ×