2 Years from date of manufacture | Product Shelf Life | Vibra-Tite

Home
>
Product

Vibra-Tite 111 Low Strength Threadlocker

A low strength anaerobic threadlocker designed for locking threaded fasteners smaller than 1/4” in diameter, which require disassembly with standard hand tools. Also works on set screws, and screws that have a long engagement length.

Select options
Vibra-Tite 121 Medium Strength Threadlocker

A medium strength anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance.

Select options
Vibra-Tite 122 Oil Tolerant Threadlocker

A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.

Select options
Vibra-Tite 123 Medium Strength High Temp Threadlocker

Typical uses include locking nuts or bolts ranging from 1/4” to 3/4” (6-20 mm) in diameter at continuous temperatures up to 450°F.

Select options
Hot

Vibra-Tite 125 Medium Strength Gel Threadlocker

A medium strength anaerobic gel threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance. No-drip gel formula.

Select options
Vibra-Tite 131 High Strength Threadlocker

A high strength anaerobic threadlocker designed to permanently lock fasteners up to 1'' in diameter. Exhibits good temperature and solvent resistance.

Select options
Vibra-Tite 132 High Strength Primerless Threadlocker

A high strength and high temperature threadlocker designed for permanently locking or sealing nuts and bolts up 1” diameter. Primerless, oil tolerant formula will cure even on passive materials such as stainless steel.

Select options
Vibra-Tite 135 High Strength Gel Threadlocker

A high strength anaerobic gel threadlocker designed to permanently lock fasteners up to 1” in diameter. Exhibits good temperature and solvent resistance. No-drip gel formulation makes it easy to apply.

Select options
Vibra-Tite 137 High Temp/High Strength Threadlocker

A high strength and high temperature anaerobic threadlocker designed to permanently lock fasteners up to 1 1/2'' in diameter. Joins threaded parts exposed to operating temperatures up to 450°F

Select options
Vibra-Tite 140 High Strength Threadlocker

A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks and seals fasteners from up to 1'' in diameter.

Select options
Vibra-Tite 141 High Strength Threadlocker

A green general purpose threadlocker for permanent locking of threaded assemblies. 141 works on fasteners up to 1″ in diameter and seals against leakage and corrosion. It resists attack from most fuels, lubricants and industrial gases.

Select options
Vibra-Tite 146 Large Diameter/High Strength Threadlocker

A high strength, large diameter anaerobic threadlocker designed to permanently lock fasteners. Resists attack from lubricants and most industrial liquids and gases.

Select options
Vibra-Tite 150 Medium Strength – Wicking Grade Threadlocker

A fast cure, low viscosity wicking anaerobic threadlocker designed to seek voids in assembled components and cure anaerobically. Can be used as a post assembly application to prevent the loosening of metal threaded fasteners.

Select options
Hot-Lock™ Extreme High Temperature Threadlocker

Vibra-Tite Hot-lock™ is a medium-high strength, ceramic-based threadlocker that exhibits unparalleled temperature resistance up to 2000°F and excellent performance across many different substrate finishes.

Select options
Vibra-Tite 207 UV/Anaerobic Dual Cure Adhesive and Sealant

Vibra-Tite® 207 is a low viscosity UV/Anaerobic dual cure adhesive and sealant for sealing ammo.

Select options
Vibra-Tite 420 Controlled Strength Thread Sealant

An anaerobic thread sealing and thread locking compound with PTFE for pipe fittings. It is designed for sealing threaded fasteners that require disassembly with standard hand tools. It exhibits good temperature and solvent resistant.

Select options
Vibra-Tite 427 Medium Strength – Stainless Steel Thread Sealant

Prevents leakage and loosening from shock and vibration. Particularly suitable for stainless steel.

Select options
Vibra-Tite 440 Pneumatic / Hydraulic Sealant Thread Sealant

A fast curing high strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressures and vibrational loosening.

Select options
Vibra-Tite 442 Hydraulic Fast Cure Gel Sealant

A fast curing gel thread selant which withstands temperatures up to 300°F (149°C).

Select options
Vibra-Tite 444 Hydraulic Sealant – High Pressure Thread Sealant

A medium strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressure and vibrational loosening.

Select options
Vibra-Tite 446 Refrigerant Sealant – High Pressure Thread Sealant

Optimum resistance to solvents and refrigerants. Excellent chemical resistance on threaded connections handling ammonia, fluorocarbons and halides. Provides an instant seal between threaded fittings. Uncured sealant is miscible with hydraulic fluid and will not clog filter and other components in hydraulic systems.

Select options
Vibra-Tite 460 High Temp/Stainless Steel Thread Sealant

Sets fast to give an instant low pressure seal of 100 psi and a high pressure seal when fully cured. This high strength product provides 100% sealing capability and does not shrink after curing, unlike more traditional solvent based pipe dopes. Contains PTFE.

Select options
Vibra-Tite 480 Multi-Purpose FBC Thread Sealant

Vibra-Tite 480 Multi-Purpose – FBC Compatible Thread Sealant with PTFE is designed to lubricate and seal threaded connections. A non-curing and non-toxic formula, Vibra-Tite 480 contains no lead or harmful metals and can be used in potable water systems.

Select options
Vibra-Tite 481 Plastic Thread Sealant

Vibra-Tite 481 Non-Curing Thread Sealant without PTFE is an off-white paste for general purpose pipe and thread sealing. Vibra-Tite 481 is specifically formulated without PTFE, to reduce over-torquing of plastic fittings and threads. Typical applications include sealing threaded pipes, pipe fittings and flanges to seal against liquids and gases.

Select options
Vibra-Tite 530 General Purpose Retaining Compound

The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Can be used where lubricity is needed to press fit parts or to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

Select options
Vibra-Tite 535 General Purpose – Gel Retaining Compound

A controlled, high strength anaerobic gel retaining compound with good temperature and solvent resistance. Replaces press fit assemblies and keyways. Used on gearbox bolts / drive shaft, bearing applications.

Select options
Vibra-Tite 538 High Strength Retaining Compound

A high strength, room curing anaerobic retaining compound that resists axial and radial loading.

Select options
Vibra-Tite 541 High Strength – Slip Fit Retaining Compound

A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

Select options
Vibra-Tite 542 High Strength – Large Gap Retaining Compound

A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

Select options
Vibra-Tite 546 Impact Resistant Retaining Compound

A quick fixturing high strength flexible, anaerobic retaining compound designed to bond metal cylindrical assemblies. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 548 Rapid Curing Retaining Compound

A medium viscosity, quick curing, high strength anaerobic retaining compound designed for tight-clearance, and slip-fit metal applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 550 Core Plug Sealant Retaining Compound

A high strength anaerobic retaining compound designed for freeze, core, and cup plug applications. Used to seal core plugs in upper and lower manifolds and engine blocks. Typical applications include core plugs and cup plugs installed into engine blocks.

Select options
Vibra-Tite 560 High Strength – High Temperature Retaining Compound

A high strength, high temperature, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 566 Gap Filling – For Worn Parts Retaining Compound

A high viscosity, general purpose, anaerobic retaining compound used for press-fit and tight-clearance, and slip-fit metal applications. Exhibits good temperature and solvent resistance. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.

Select options
Vibra-Tite 567 High Temperature – Large Gap Retaining Compound

A high temperature, high strength, large gap filling anaerobic retaining compound designed for metal cylindrical assembly applications. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 709 Flexible Gasket Maker

Provides resistance to low pressures after assembly of flanges. Seals between rigid metal surfaces and flanges such as valve covers and gearbox casings. Can be used with or without pre-cut, pre-formed gaskets.

Select options
Vibra-Tite 710 High Temperature Rigid Flange Sealant Gasket Maker

Vibra-Tite 710 Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. Provides an instant low pressure seal. This product can be used with or without pre-cut, pre-formed gaskets.

Select options
Vibra-Tite 730 Flexible Solvent Resistant Gasket Maker

High viscosity, single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. Provides an instant low pressure seal. Seals joints between rigid metal faces and flanges such as valve covers and gearbox casings.

Select options
Vibra-Tite 732 Flexible Gasket Maker

A tough flexible formed-in-place gasket. Provides an instant low pressure seal. For fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, chainsaws, lawn mowers etc.

Select options
Vibra-Tite 996 Red RTV Silicone Gasket Maker

A one-part acetoxy cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.

Select options
Vibra-Tite 998 Black RTV Silicone Gasket Maker

A one-part acetoxy cure silicone sealant with high temperature resistance that cures in the presence of atmospheric moisture to produce a durable and flexible silicone rubber compound.

Select options

‹ › ×