Retaining Comparison Table
| Vibra-Tite Part # | Available Sizes | Competes with Loctite® # | Approx. Viscosity (cP) |
Max Gap Fill (IN) | Shear Strength (PSI) |
Temp Range °F | Fixture Time | Specific Gravity | Primer | Specs Met |
|---|---|---|---|---|---|---|---|---|---|---|
| 530 | 675 / 609 | General Purpose - Green | ||||||||
| 53002 | 2 mL Bullet | 100 - 150 | 0.005 | 2300 | -65 to 350 | 10 - 15min | 1.1 | N, T | ASTM D-5363, MIL-R-46082, GM-1183024 | |
| 53010 | 10 mL Bottle | 60921 | ||||||||
| 53050 | 50 mL Bottle | 60931 | ||||||||
| 53025 | 250 mL Bottle | 60941/67541 | ||||||||
| 53000 | 1 L Jug | 60943 | ||||||||
| 535 | General Purpose - Gel - Green | |||||||||
| 53535 | 35 mL Pump | Gel | 0.015 | -65 to 300 | 5-10min | 1.09 | N, T | |||
| 538 | 638 | High Strength - Green | ||||||||
| 53850 | 50 mL Bottle | 21448 | 2500 | 0.015 | 4000+ | -65 to 300 | 10 - 15min | 1.1 | N, T | |
| 53825 | 250 mL Bottle | 21449 | ||||||||
| 53800 | 1 L Jug | |||||||||
| 541 | 680 | High Strength - Slip Fit - Green | ||||||||
| 54110 | 10 mL Bottle | 68015 | 950 | 0.015 | 3200 | -65 to 350 | 20 - 30min | 1.1 | T | NSF Non-Food |
| 54150 | 50 mL Bottle | 68035 | ||||||||
| 54125 | 250 mL Bottle | 68060 | ||||||||
| 54100 | 1 L Jug | 68090 | ||||||||
| 542 | 635 | High Strength - Large Gap - Green | ||||||||
| 54210 | 10 mL Bottle | 2000 | 0.015 | 4000+ | -65 to 300 | 15 - 20min | 1.05 | T | ASTM D-5363, MIL-R-46082 | |
| 54250 | 50 mL Bottle | 63531 | ||||||||
| 54225 | 250 mL Bottle | 63541 | ||||||||
| 54200 | 1 L Jug | |||||||||
| 546 | Impact Resistant - Green | |||||||||
| 54650 | 50 mL Bottle | 1200 - 2600 | 0.015 | 2000+ | -65 to 350 | 20 - 30min | 1.07 | N | ||
| 54625 | 250 mL Bottle | |||||||||
| 54600 | 1 L Jug | |||||||||
| 548 | 648 | Rapid Curing - Green | ||||||||
| 54850 | 50 mL Bottle | 21444 | 400 - 600 | 0.007 | 3500+ | -65 to 350 | 2 - 5min | 1.1 | N, T | |
| 54825 | 250 mL Bottle | 21445 | ||||||||
| 54800 | 1 L Jug | |||||||||
| 550 | 11358 | Core Plug Sealant - Blue | ||||||||
| 55050 | 50 mL Bottle | 8500 Thixotropic | 0.02 | 2300+ | -65 to 350 | 30 - 45min | 1.1 | N | ||
| 55000 | 1 L Jug | 11358 | ||||||||
| 560 | 640 | High Strength - High Temperature - Green | ||||||||
| 56010 | 10 mL Bottle | 600 | 0.007 | 3000+ | -65 to 400 | 30min | 1.1 | N, T | ASTM D-5363, MIL-R-46082 | |
| 56050 | 50 mL Bottle | 64031 | ||||||||
| 56025 | 250 mL Bottle | 64041 | ||||||||
| 56000 | 1 L Jug | |||||||||
| 566 | 660 | Gap Filling - For Worn Parts - Grey | ||||||||
| 56650 | 50 mL Tube | Paste | 0.020 | 2400+ | -60 to 350 | 30 - 45min | 1.04 | N, T | ||
| 567 | 620 | High Temperature - Large Gap - Green | ||||||||
| 56710 | 10 mL Bottle | 62015 | 5000 - 10000 | 0.015 | 3500+ | -65 to 400 | 15 - 20min | 1.16 | N, T | GM-1183024 |
| 56750 | 50 mL Bottle | 62040 | ||||||||
| 56725 | 250 mL Bottle | 62070 | ||||||||
| 56700 | 1 L Jug | 62085 | ||||||||