VIBRA-TITE FOR CAR ENTHUSIASTS

Threadlockers • Thread Sealants • Liquid Gasket Makers • RTV Silicones • Retaining Compounds • Anti-Seize Lubricants

THREADLOCKERS

Anaerobic Threadlockers form a hard lock and are applied to a fastener then installed into the mating part. In the absence of air and the presence of metal, a chemical reaction takes places which causes the material to harden, unitizing the assembly.

• Locks and seals threaded fasteners
• Prevents loosening from shock and vibration
• Performs better than mechanical lockers
• Alleviates rust-lock

Vibra-Tite VC threadlockers are soft locking materials which are applied to a fastener and then air dried. Once assembled, the vibration absorbing characteristics keep the fastener isolated and prevent loosening. VC threadlocker can be easily adjusted, removed, and reused.

• Works on metal, wood, pp and ppe plastics and more
• For fasteners of any shape or size
• Works on internal or external threads
• Once dried on part, can be installed underwater unlike anaerobics

THREAD SEALANTS

• Seals and secures metal pipes and fittings
• Fills the space between threaded metal parts
• Low and high pressure applications
• Prevents corrosion and galling of threads
• Prevents leakage caused by tape shredding, vibration loosening, solvent evaporation, or damaged threads
• Seals to the burst strength of most piping systems
• Facilitates assembly

LIQUID GASKET MAKERS

Anaerobic Gasket Makers alleviate the need for preformed gaskets. They remain liquid when exposed to air and cure when confined between mating flanges. Prevents corrosion and galling of threads. Can fill gaps as large as 0.050.

Gasket Sealants are solvent based products designed to form an in-place gasket.

RTV Silicone Gasket Makers are designed for bonding, sealing, adhering and seam sealing. Excellent chemical resistance. Withstands extreme temperature cycling. One-part formulation cures with moisture. Extremely flexible. Solvent-free. Max Gap Fill .25 in.

RETAINING COMPOUNDS

Vibra-Tite anaerobic retaining compounds are designed to increase shear strength on non-threaded cylindrical metal assemblies. The liquid anaerobic material fills the voids between close-fitting metal parts and cures to a toughened thermoset-plastic which creates a solid one piece assembly. Retaining compounds seal joints against leakage and prevent corrosion. The materials have gained wide acceptance as a standard method for assembling press-fit and slip-fitted parts.

• Increases the shear strength on non-threaded cylindrical metal assemblies
• Fills voids between close-fitting metal assemblies
• Creates a solid one-piece assembly
• Seals joints against leakage
• Prevents corrosion

ANTI-SEIZE LUBRICANTS

The Anti-Seize family of lubricants are specially formulated to prevent seizing, galling, pitting, excessive wear, and corrosion. The lubricating formulation is a protective paste consisting of fine flakes of graphite suspended in a blend of lubricants and oils. It will not wash, squeeze or burn out, even at elevated temperatures and high pressures.

• Eases assembly and disassemble
• Reduces friction and wear
• Protects assemblies from corrosion
• Withstands high temperatures and pressures
• Use with Gears, Chains, Cables, Sprockets, Fasteners Threads

Why use Vibra-Tite products?

They work as well and sometimes better than the leading brand,
and COST UP TO 40% LESS.

PRODUCT OPTIONS GUIDE