Product Fixture Time (Minutes) 30

Vibra-Tite 122 Oil Tolerant Threadlocker

A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 1/4'' to 3/4'' in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.

Select options
Hot

Vibra-Tite 125 Medium Strength Gel Threadlocker

A medium strength anaerobic gel threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassembly with standard hand tools. Exhibits good temperature and solvent resistance. No-drip gel formula.

Select options
Vibra-Tite 137 High Temp/High Strength Threadlocker

A high strength and high temperature anaerobic threadlocker designed to permanently lock fasteners up to 1 1/2'' in diameter. Joins threaded parts exposed to operating temperatures up to 450°F

Select options
Vibra-Tite 140 High Strength Threadlocker

A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks and seals fasteners from up to 1'' in diameter.

Select options
Vibra-Tite 141 High Strength Threadlocker

A green general purpose threadlocker for permanent locking of threaded assemblies. 141 works on fasteners up to 1″ in diameter and seals against leakage and corrosion. It resists attack from most fuels, lubricants and industrial gases.

Select options
Vibra-Tite 440 Pneumatic / Hydraulic Sealant Thread Sealant

A fast curing high strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressures and vibrational loosening.

Select options
Vibra-Tite 444 Hydraulic Sealant – High Pressure Thread Sealant

A medium strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2″ in diameter, resisting high pressure and vibrational loosening.

Select options
Vibra-Tite 541 High Strength – Slip Fit Retaining Compound

A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.

Select options
Vibra-Tite 546 Impact Resistant Retaining Compound

A quick fixturing high strength flexible, anaerobic retaining compound designed to bond metal cylindrical assemblies. Exhibits excellent temperature and solvent resistant. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 560 High Strength – High Temperature Retaining Compound

A high strength, high temperature, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts.Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs.

Select options
Vibra-Tite 932 Encapsulating Epoxy

Vibra-Tite 932 is two-part epoxy encapsulant and adhesive. This system forms a resilient, long work time potting and encapsulant material with an easy mix ratio and good adhesion to thermoplastics. It will cure rapidly with heat to produce a material with excellent chemical, heat, and moisture resistance.

Read more
Vibra-Tite 934 Induction Cure Epoxy

Vibra-Tite 934 is a single-part induction cured epoxy adhesive with excellent adhesion to metal oily surfaces as well as composite materials. Can be used to enhance joint stiffness and joint durability. The high bond strength of this adhesive allows it to replace mechanical fasteners, soldering, brazing, or welding. Requires heat in the range of 120°C to 200°C. Vibra-Tite 934 is non-sagging allowing use with large gaps and on vertical surfaces.

Select options